Super Mario Galaxy 2 [SB4P01]

[dcx2]

lol, ardemii is not the author of that code.  That's my name in the brackets.   ;D

But I only have the NTSC...ardemii was testing the port to see if it worked.  Sky, you should test the levitation multi-teleporter-levitation.  ardemii is having problems with it, but I think the problems might be related to using the USB Gecko, and it might work as an SD cheat

Multi-Teleportation with Levitation PAL [DCX2]
C23880AC 0000001F
3D808075 618C6100
A3CC0002 57C0056B
418200E0 57C0E007
418200D8 48000005
7FE802A6 3BFF00A0
7C000034 1C00000C
7FFF0214 57C004A5
41820010 7C6C1B78
7FFEFB78 48000060
C02C0064 EC21082A
EC21082A EC21082A
EC21082A EC21082A
C04C000C EC420072
C01F0000 EC001028
D01F0000 C04C0010
EC420072 C01F0004
EC001028 D01F0004
C04C0014 EC420072
C01F0008 EC001028
D01F0008 7FECFB78
7C7E1B78 800C0000
901E0000 800C0004
901E0004 800C0008
901E0008 48000034
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
80010034 00000000
hold b+z, then press an arrow to store coordinates in a slot (there are 4). hold b, then press an arrow to restore coordinates from slot. While restoring coordinates (b+arrow, no z), you will be "frozen" in the air. During this time, the analog stick's Y axis will throttle the levitation speed. Levitation direction will be determined by the orientation of the Wiimote. You can go through solid objects like walls, floors, etc.

b+z+(other) will store Mario's current coordinates
b+(other) will load the coordinates from that slot
b+(other)+(Analog Stick Y Axis) will levitate in a direction according to the (Wiimote's orientation)

[ardemii]

You must cogratulate dcx2 I have just tested it with geckodotnet,wiird and sd cheat. :mad:

[dcx2]

Wait, so multi-teleport-levitate works for you now?

[ramis]

Suggested codes:

Code for orange timers by wiiztec
Code for fly when spin by brkirch
Keypad activator for EN PAL by ardemii

Button 2 to switch between spinn and fly
28B37FCC 00000100
043EE754 38600007
CC000000 00000000
043EE754 A06306F8
E0000000 80008000

Button 1 to stop or start huge orange timers
28B37FCC 00000200
04461078 90030034
CC000000 00000000
04461078 60000000
E0000000 80008000

the orange timer toggle not works. i mean, the timer works fine but not the toggle or so. sorry for my bad english.

can anyone the ntsc code

disable large orange timers toggle A+2 [wiiztec]
28750A02 00000900
04461078 90030034
CC000000 00000000
04461078 60000000
E0000000 80008000
hetoan2's code disables the small yellow ones

convert to pal with on/off? Thanks..

[ardemii]

Teleporter with levitations work with ssd cheats

[dcx2]

ardemii - that's great news.

ramis - try this.

disable large orange timers toggle A+2 [wiiztec]
28756102 00000900
04461078 90030034
CC000000 00000000
04461078 60000000
E0000000 80008000
hetoan2's code disables the small yellow ones

[ardemii]

dcx2 can you put these code in super mario galxy all regions: ;D

Multi-Teleportation with Levitation [DCX2]
C23880AC 0000001F
3D808075 618C6100
A3CC0002 57C0056B
418200E0 57C0E007
418200D8 48000005
7FE802A6 3BFF00A0
7C000034 1C00000C
7FFF0214 57C004A5
41820010 7C6C1B78
7FFEFB78 48000060
C02C0064 EC21082A
EC21082A EC21082A
EC21082A EC21082A
C04C000C EC420072
C01F0000 EC001028
D01F0000 C04C0010
EC420072 C01F0004
EC001028 D01F0004
C04C0014 EC420072
C01F0008 EC001028
D01F0008 7FECFB78
7C7E1B78 800C0000
901E0000 800C0004
901E0004 800C0008
901E0008 48000034
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
80010034 00000000
hold b+z, then press an arrow to store coordinates in a slot (there are 4). hold b, then press an arrow to restore coordinates from slot. While restoring coordinates (b+arrow, no z), you will be "frozen" in the air. During this time, the analog stick's Y axis will throttle the levitation speed. Levitation direction will be determined by the orientation of the Wiimote. You can go through solid objects like walls, floors, etc.

Multi-Teleporter [dcx2]
C23880AC 00000015
3FC08075 63DE6102
A3DE0000 57C0056B
4182008C 57C0E007
41820084 48000005
7FE802A6 3BFF004C
7C000034 1C00000C
7FFF0214 57C004A5
41820010 7C6C1B78
7FFEFB78 4800000C
7FECFB78 7C7E1B78
800C0000 901E0000
800C0004 901E0004
800C0008 901E0008
48000034 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 80010034
60000000 00000000
There are four slots, corresponding to the up/down/left/right arrows. To store Mario's coordinates in a slot, hold b+z, then press the arrow for the slot you want to store the coordinates in. To load Mario's coordinates from a slot, hold b, then press the arrow of the slot you want to load.
.
You can use these to warp between multiple points at will. Set a warp point up near Yoshi, then get somewhere that Yoshi can't normally go, set another warp point, warp back to Yoshi, get him, warp forward. Or set warp points near power-ups so you can warp to and from them easily. Warp points can also get you back from launch stars. They can be the ultimate checkpoint that is remembered even if you leave the level and come back.

p2freeze all enemies and obstacles [dcx2]
04362968 60000000
0436296C 38600001
it's like p2 is grabbing every enemy at the same time! They're all frozen and can't hurt you.


Don't lose coins when dying [dcx2]
044C92AC 60000000

Infinite Yoshi Air Kicking (aka Yoshi Moon Jump) [dcx2]
0441BB0C 38000001

unlimited time to remount yoshi [wiiztec]
044129E0 60000000

extremely large yellow yoshi light [dcx2]
042C4F0C 4800000C
C22C4EF4 00000002
3C00461C 90030008
38000000 00000000
This should reveal the entire level forever


Surface Swapper [DCX2]
C2039888 0000000A
48000005 7C8802A6
38840014 7C6418AE
48000038 00000000
00010203 04050607
08090A0B 0C0D0E0F
10111213 14151617
18191A1B 1C1D1E1F
20212223 24252627
28292A2B 2C2D2E2F
80010014 00000000

No Deadly Surfaces [DCX2]
C2039888 0000000A
48000005 7C8802A6
38840014 7C6418AE
48000038 00000000
00000203 00050607
0809000B 0C0D0E0F
10000013 14151617
00001A00 001D1E00
20212223 24252627
28002A2B 2C2D2E2F
80010014 00000000

[Skyground95]

lol, ardemii is not the author of that code.  That's my name in the brackets.   ;D

But I only have the NTSC...ardemii was testing the port to see if it worked.  Sky, you should test the levitation multi-teleporter-levitation.  ardemii is having problems with it, but I think the problems might be related to using the USB Gecko, and it might work as an SD cheat

Multi-Teleportation with Levitation PAL [DCX2]
C23880AC 0000001F
3D808075 618C6100
A3CC0002 57C0056B
418200E0 57C0E007
418200D8 48000005
7FE802A6 3BFF00A0
7C000034 1C00000C
7FFF0214 57C004A5
41820010 7C6C1B78
7FFEFB78 48000060
C02C0064 EC21082A
EC21082A EC21082A
EC21082A EC21082A
C04C000C EC420072
C01F0000 EC001028
D01F0000 C04C0010
EC420072 C01F0004
EC001028 D01F0004
C04C0014 EC420072
C01F0008 EC001028
D01F0008 7FECFB78
7C7E1B78 800C0000
901E0000 800C0004
901E0004 800C0008
901E0008 48000034
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
80010034 00000000
hold b+z, then press an arrow to store coordinates in a slot (there are 4). hold b, then press an arrow to restore coordinates from slot. While restoring coordinates (b+arrow, no z), you will be "frozen" in the air. During this time, the analog stick's Y axis will throttle the levitation speed. Levitation direction will be determined by the orientation of the Wiimote. You can go through solid objects like walls, floors, etc.

b+z+(other) will store Mario's current coordinates
b+(other) will load the coordinates from that slot
b+(other)+(Analog Stick Y Axis) will levitate in a direction according to the (Wiimote's orientation)

oh, sorry, I didn't know that  :p but still like it  ;)

[ramis]

ardemii - that's great news.

ramis - try this.

disable large orange timers toggle A+2 [wiiztec]
28756102 00000900
04461078 90030034
CC000000 00000000
04461078 60000000
E0000000 80008000
hetoan2's code disables the small yellow ones

Thanks, works fine :-)

[sneakywolfshoe]

here

10X enhanced aerial momentum control toggle Z+- [wiiztec]
28756102 00003000
047DC878 3F800000
CC000000 00000000
047DC878 41200000
E0000000 80008000

Guys,this code doesn't work for me  :'(

[Takeshi55]

Surface Swapper [DCX2]
C2039888 0000000A
48000005 7C8802A6
38840014 7C6418AE
48000038 00000000
00010203 04050607
08090A0B 0C0D0E0F
10111213 14151617
18191A1B 1C1D1E1F
20212223 24252627
28292A2B 2C2D2E2F
80010014 00000000

What does this do?

[dcx2]

It can be used to replace one surface (for example, lava) with another surface (ground).  Then you can walk on lava.

[spoiler]



[/spoiler]


You need to reference wiiztec's surface list when using this code.  Here's a detailed explanation of how to use my Surface Swapper.

http://wiird.l0nk.org/forum/index.php/topic,5808.msg53658/topicseen.html#msg53658

EDIT: Or you can just use this.  it replaces every surface that hurts you with ground, but leaves the other surfaces (slipsand, ice, etc) alone.

No Deadly Surfaces [DCX2]
C2039888 0000000A
48000005 7C8802A6
38840014 7C6418AE
48000038 00000000
00000203 00050607
0809000B 0C0D0E0F
10000013 14151617
00001A00 001D1E00
00212223 24252627
28002A2B 2C2D2E2F
80010014 00000000

[Skyground95]

can this replace water with for example ground? (so you can walk on water?)  ;D

[dcx2]

No, water is not a surface.

Look at wiiztec's surface list.  There is shallow water, but that's it.

[sneakywolfshoe]

+Got a new request guys,can anyone port these codes please?
Enemies Disappear [Anarion]
28750A02 00004001
04026B44 1001002A
E0000000 00000000
28750A02 00004002
04026B44 10010028
E0000000 80008000
Activate = C & LEFT
Deactivate = C & RIGHT
This code does more than just make the enemies disappear. It also makes 90% of all objects disappear. Turn the code off and the enemies/objects will be right where they were before.

No Animation [Anarion]
28750A02 00002001
0452BF14 60000000
0452BF18 60000000
E0000000 00000000
28750A02 00002002
0452BF14 90010010
0452BF18 98A30005
E0000000 80008000
Activate = Z & LEFT
Deactivate = Z & RIGHT