possibly my last attempt

[Igglyboo]

A word from the wise Jassim.
Patience is the key.
I had my gecko for about 2 months before I made any decent codes(i still wouldn't consider my codes *good* but w/e).
It takes a while to get used to it and especially if you haven't done something like this before(cheat engine).

[Jassim]

k thx iggly, ill keep trying this definitly isnt my last attempt coz im getting kind of used to wiirdGUI.

thx

[paprika_killer]

A word from the wise Jassim.
Patience is the key.
I had my gecko for about 2 months before I made any decent codes(i still wouldn't consider my codes *good* but w/e).
It takes a while to get used to it and especially if you haven't done something like this before(cheat engine).

lol, you don't call the game camera good? :P:P

anyway, jassim, cling to a wall and see if there are any values changing while you're on the wall

[Jassim]

paprika where do i do that? and if in the meory viewer, wat value/adress do i enter?

[paprika_killer]

just start out with a unknown 32 bit search, cling to a wall and do "not equal to" search.
cling for a bit longer a do a "less than" while still clinging. let go, do "not equal".
not you have to filter out a thousand rapid changing values, 3x "equal to" should cut your results down significantly.
repeat a few times and you should have your value.

[Jassim]

thx a lot paprike but reckon you could just lemme know wat this bit meant "not you have to filter out a thousand rapid changing values, 3x "equal to" should cut your results down significantly" please, sry i couldnt understand it and thx

[paprika_killer]

well one very annoying this that I noticed is that there are tens of thousands of values that change faster than the framerate, and if you do unknown search values these easily slip through your searches. even if only 1% came through that would still be over 100 hits.

thats why I usually do a couple of "equal to" searches when I know the value I look for shouldn't change, to catch out as much of these junk values as possible. try jumping and doing everything but wallclinging and repeat the search over and over, you will see the number of hits drop like a stone.

[Jassim]

address           old value         value
805BF12C        804F67E0        804F67E0
80C0B710        80EE3160        80EE3160
80C0B750        80BF8BBC        80BF8BBC
80C28714        80EE3170        80EE3160

gonna test em each out in the memory viewer, if i try to search again i get no codes so this is the best i could get. ill edit this post once ive tested them

1) i click auto update, changes to some weird weird numebr which i can see for a split second then changes bak (this is while im standing) i grab onto the wall, value doesnt change until i hit the floor, and when i hit the floor it changes every 5 seconds

2) i click auto update, value immediately changes to a different value then another one after about 7 seconds, then bak to the original and keeps changing about every 5 seconds between those 3 values. i grab onto the wall


3) i click auto update, nothing hapens yet!woohoo!!XD. anyway i latch onto the wall the value stays the same, the minute i let go of the wall, the vaue turns into 80C01A34

4) i click auto update, the higlighted value NEVER changes no matter what i do whetehr its grab the wall, jump, land hit etc.


im guessing 3s the right one but i could be wrong.


tyvm to every1 helping

[Igglyboo]

A word from the wise Jassim.
Patience is the key.
I had my gecko for about 2 months before I made any decent codes(i still wouldn't consider my codes *good* but w/e).
It takes a while to get used to it and especially if you haven't done something like this before(cheat engine).

lol, you don't call the game camera good? :P:P

anyway, jassim, cling to a wall and see if there are any values changing while you're on the wall

I'd call it long the actual code is not much. I basically just add/ subtract from 6 different address when a button is triggered. I'm trying to rewrite it completely in ASM, which will shorten the code dramatically.

[Jassim]

btw jsut for the record, the only reason i thought of giving up was because i forgot which guide it was that said something like: no previous hacking experience needed, and made ti seem easy to hack mario galaxy.

[Jassim]

anyone know which of the 4 values r useful?

[paprika_killer]

they look like pointers so you might want to see what value they point to.

[Jassim]

sry how do i do that?

[paprika_killer]

go in memory viewer and then simply go to the adress the is stored in one of those 4 values

[Jassim]

k i right clicked on the first pointer and clicked memory viewer, the value/address in the grey box at the top is 805BF12C

the value higlighted by default is 804F67E0, which of them is the valu they point to?