Wiird Currency

[jensbethge]

hello

i have a code for Spiderwicks.

The Code is 93122094 and 93122306 , how can I convert it?

I know 80xxxxxx = 04xxxxxx
and
81xxxxxx is 05xxxxxx

but what is 93xxxxxx ?
thanks for help
jens

[matt123337]

hello

i have a code for Spiderwicks.

The Code is 93122094 and 93122306 , how can I convert it?

I know 80xxxxxx = 04xxxxxx
and
81xxxxxx is 05xxxxxx

but what is 93xxxxxx ?
thanks for help
jens

try this:

42000000 93000000 //sets ba to 93000000
04122094 yyyyyyyy //32bit ram write
04122306 yyyyyyyy //32-bit ram write
E000000 80008000 //resets ba to 80000000 and resets po to 80000000

yyyyyyyy=money value

tell me if it works.

[jensbethge]

sorry, it works not  :'(

well, my first POKE Codes:

1000 x Goblin teeth = 9312209A 000003E8
                              93122306 000003E8

Munition slingshot   = 9312215F 000003E8

only POKE Codes not GCT Codes

Thanks for Help

[brkirch]

try this:

42000000 93000000 //sets ba to 93000000
04122094 yyyyyyyy //32bit ram write
04122306 yyyyyyyy //32-bit ram write
E000000 80008000 //resets ba to 80000000 and resets po to 80000000

yyyyyyyy=money value

tell me if it works.

That is almost correct, but the base address is 26-bit aligned so if you are going to change the base address then your code should be this:
42000000 92000000 // sets ba to 92000000
05122094 yyyyyyyy // 32-bit ram write
05122306 yyyyyyyy // 32-bit ram write
E000000 80008000 // resets ba to 80000000 and resets po to 80000000

Or it might just be easier to change the pointer address:
4A000000 93000000 // sets po to 93000000
14122094 yyyyyyyy // 32-bit ram write
14122306 yyyyyyyy // 32-bit ram write
E000000 80008000 // resets ba to 80000000 and resets po to 80000000

[Panda On Smack]

Hey brkirch

You been hiding?

[matt123337]

try this:

42000000 93000000 //sets ba to 93000000
04122094 yyyyyyyy //32bit ram write
04122306 yyyyyyyy //32-bit ram write
E000000 80008000 //resets ba to 80000000 and resets po to 80000000

yyyyyyyy=money value

tell me if it works.

That is almost correct, but the base address is 26-bit aligned so if you are going to change the base address then your code should be this:
42000000 92000000 // sets ba to 92000000
05122094 yyyyyyyy // 32-bit ram write
05122306 yyyyyyyy // 32-bit ram write
E000000 80008000 // resets ba to 80000000 and resets po to 80000000

Or it might just be easier to change the pointer address:
4A000000 93000000 // sets po to 93000000
14122094 yyyyyyyy // 32-bit ram write
14122306 yyyyyyyy // 32-bit ram  write
E000000 80008000 // resets ba to 80000000 and resets po to 80000000

ah right just noticed before I read your post... I had to do that at the library so it was off the top of my head... sorry about that jensbethge my mistake

[jensbethge]

it works.  :D
thanks