Super Smash Bros Brawl [RSBE01]

Started by hetoan2, April 05, 2009, 10:48:41 AM

Previous topic - Next topic

jaysterinoizm

Could somebody PLEASE make a code that unlocks all songs in My Music? I've unlocked all the music but it doesn't show in my music... So basically I'll never have all the music again, somebody please help!

REDSOXROX

Quote from: REDSOXROX on June 12, 2009, 10:10:57 PM
Quote from: Yoshi52 on June 12, 2009, 08:50:51 PM
Quote from: REDSOXROX on June 12, 2009, 03:42:33 AM
Another question, what are the XXXX values and YYYYYY values for in this code:

Spawn Items With Button(s) XXXX (Activator 28YYYYYY) [brkirch]
C298D574 00000004
3D608000 880B5004
2C000001 4082000C
38000002 980B5004
809D08C0 00000000
C2951F3C 0000001A
3FE08000 817F5000
A16B0000 3800XXXX
7C0B5838 7C005800
897F5004 4082008C
2C0B0002 41820038
3FE08095 3D604800
396B0028 917F1FC8
3C006000 901F1F58
901F1F64 901F1F70
901F2030 901F2040
901F2058 39600001
48000064 3FE08095
3D604082 396B0178
917F1FC8 3D604182
380B02B0 901F1F58
380B02A4 901F1F64
380B0298 901F1F70
380B01D8 901F2030
380B01C8 901F2040
380B01B0 901F2058
39600002 48000018
3FE08095 A17F1FC8
2C0B4800 4182FFA8
39600000 3FE08000
997F5004 3FE080AE
60000000 00000000
04005000 80YYYYYY
Doesn't work in certain modes (The Subspace Emissary, and modes that don't have items such as HRC)

Uhm.... Seems to be X is the button combo values, and Y is the address for the button activator? If so, that's kind of.... a different way of doing it...
It doesn't seem like that because YYY's line is a RAM-write code line...although it does seem  to say XXXX is for button combo...
anymore help on this?
Red Sox vs. Yankees 4/4/2k10 Season Opener
Red Sox: 9 Yankees: 7 Final!

TornZero

I asked the following question on GSCentral but no one replied, not even denying the request. The code that will be shown only works when you have a GCN Controller active, so could someone get it to work with the WiiMote+Nunchuk?

Teleportation [Igglyboo]
205BA488 00000040
4A000000 806212CC
92210005 00000000
92210004 00000004
E0000000 80008000
205BA488 00000020
80000000 80623320
80000001 00000000
60000006 00000000
60000003 00000001
4A001000 00000000
4A101001 00000000
36000000 00000032
58010000 00000004
DE000000 80008180
58010000 00000060
DE000000 80008180
58010000 00000018
92210006 000000BC
100000BC 00000007
94210005 0000000C
94210004 00000010
94210006 000000BC
58010000 00000088
10000075 00000000
94210005 0000000C
94210004 00000010
80100001 00000008
62000000 00000001
E200000F 00000000
80000001 00000000
80100000 00000000
62000000 00000000
E0000000 80008000

R+L+Up(Dpad) To save coordinates
R+L+Down(Dpad) To teleport to coordinates
To change the teleport command change this line
205BA488 00000064
Do not change the coordinate saving command


Yes, I am aware that Igglyboo says not to change the coordinate-saving command, but please if you can, get this code to work for someone who can only use a WiiMote+Nunchuk control setup.

REDSOXROX

Quote from: TornZero on July 30, 2009, 05:09:26 AM
I asked the following question on GSCentral but no one replied, not even denying the request. The code that will be shown only works when you have a GCN Controller active, so could someone get it to work with the WiiMote+Nunchuk?

Teleportation [Igglyboo]
205BA488 00000040
4A000000 806212CC
92210005 00000000
92210004 00000004
E0000000 80008000
205BA488 00000020
80000000 80623320
80000001 00000000
60000006 00000000
60000003 00000001
4A001000 00000000
4A101001 00000000
36000000 00000032
58010000 00000004
DE000000 80008180
58010000 00000060
DE000000 80008180
58010000 00000018
92210006 000000BC
100000BC 00000007
94210005 0000000C
94210004 00000010
94210006 000000BC
58010000 00000088
10000075 00000000
94210005 0000000C
94210004 00000010
80100001 00000008
62000000 00000001
E200000F 00000000
80000001 00000000
80100000 00000000
62000000 00000000
E0000000 80008000

R+L+Up(Dpad) To save coordinates
R+L+Down(Dpad) To teleport to coordinates
To change the teleport command change this line
205BA488 00000064
Do not change the coordinate saving command


Yes, I am aware that Igglyboo says not to change the coordinate-saving command, but please if you can, get this code to work for someone who can only use a WiiMote+Nunchuk control setup.
Wiimote+Nunchuck activator addresses
Wii Controller
1 284F7880
2 284F8220
3 284F8BC0
4 284F9560
Just add your button activators and you're set.
(The tele-save command is first line I think)
Sounds like it may not work however
Red Sox vs. Yankees 4/4/2k10 Season Opener
Red Sox: 9 Yankees: 7 Final!

Asagiri

#64
I became interested in codes when I saw a Wario player start off as Wario-man and never switch out of that form on Wifi, and just tried to go online as Giga Bowser, but I don't seem to have the effect, I'm just the character that I swapped for Giga Bowser.

Any idea on how aforementioned Wario player got it to work?

EDIT: Okay, I found the mod codes. Gee, these can get you banned? I sure hope that guy did!

lamentofking

Quote from: idkWITH ANYONE - Basic Brawl Multiplayer [Phantom Wings]
4A000000 90180B44
38000000 00FF1000
10000000 0000000C

*Must Be Host. You must also start the Waiting Room before someone else joins (kinda like having someone join your game instead of you joining theirs).


WITH ANYONE - Team Battle Multiplayer [Phantom Wings & Jose Gallardo]
4A000000 90180B44
38000000 00FF1100
10000000 0000000C

*Works without being the host, but the same rule applies for starting the Waiting Room before others join (have them join while you are in the waiting room).
These are the only codes i have active. The basic brawl just doesn't see the other controller. The team battle gets us to the waiting room and then just stays there. 2 different times it got us to the game but the first time my partner couldn't move then the 2nd time his character kept going off the edge. Can someone help me with these codes please?

MarcBuckley

 Hi everyone I'm new here and I'm currently working on Partial size modifications to enhance my Textures I've designed right now I'm currently trying to adjust Peach's body to fit that of my Chun-Li Peach texture the obvious problem is that Peach's legs and thighs are just too damn small and i was wondering if anyone knows if there's a way to modify her waist the other problem is when the legs are enlarged her pelvis stays the same making even less sense it would be much appreciated if someone could help me on this problem so i can finish up this texture and move on to the next one.

Here's the list of parts that i can currently mod

In Short does anyone know how to modify her Hips

0D - Peach

Offset Part Note
0000 N/A
000C N/A
0018 N/A
0024 N/A
0030 Whole
003C Whole Wrong Position
0048 Whole Wrong Position
0054 Whole Wrong Position
0060 Leg Left
006C Lower Leg Left
0078 Foot Left
0084 Toe Left
0090 Leg Right
009C Lower Leg Right
00A8 Foot Right
00B4 Toe Right
00C0 Skirt part1
00CC Skirt part2
00D8 Skirt part3
00E4 Skirt part4
00F0 Skirt part5
00FC Skirt part6
0108 Skirt part7
0114 Skirt part8
0120 Skirt part9
012C Skirt part10
0138 Skirt part11
0144 Skirt part12
0150 Skirt part13
015C Skirt part14
0168 Skirt part15
0174 Skirt part16
0180 Skirt part17
018C Skirt part18
0198 Skirt part19
01A4 Skirt part20
01B0 Skirt part21
01BC Skirt part22
01C8 Skirt part23
01D4 Skirt part24
01E0 Skirt part25
01EC Skirt part26
01F8 Skirt part27
0204 Skirt part28
0210 Skirt part29
021C Skirt part30
0228 Skirt part31
0234 Skirt part32
0240 Skirt part33
024C Skirt part34
0258 Skirt part35
0264 Skirt part36
0270 Skirt part37
027C Skirt part38
0288 Skirt part39
0294 Skirt part40
02A0 Upper Body
02AC Upper Body
02B8 Collar
02C4 Arm Left
02D0 Arm Left
02DC Forearm Left
02E8 N/A
02F4 Hand Left
0300 Index Finger Left
030C Index Finger Left
0318 Middle Finger Left
0324 Middle Finger Left
0330 Ring Finger Left
033C Ring Finger Left
0348 Little Finger Left
0354 Little Finger Left
0360 N/A
036C N/A
0378 N/A
0384 N/A
0390 N/A
039C Thumb Left
03A8 Thumb Left
03B4 Shoulder Left
03C0 Head
03CC Head
03D8 Tiara
03E4 Hair
03F0 Hair
03FC Hair
0408 Hair
0414 Jaw
0420 Arm Right
042C Forearm Right
0438 Hand Right
0444 N/A
0450 Hand Right
045C Index Finger Right
0468 Index Finger Right
0474 Middle Finger Right
0480 Middle Finger Right
048C Ring Finger Right
0498 Ring Finger Right
04A4 Little Finger Right
04B0 Little Finger Right
04BC N/A Right
04C8 Thumb Right
04D4 Thumb Right
04E0 Shoulder Right
04EC N/A

KaiserYoshi

Are there any song name changer codes beyond Spear Pillar? I need to change a song on Port Town Aero Dive but there doesn't appear to be a code for that.

Louisdebou

Hi guys,

Can i keep my nickname on a Brawl replay ? I think thats useful (especially for matchs w/ same characters) and i see this code in action (i think). See this video : that not a live match but a recorded replay and you can see the nickname "Mr. R" ! => http://www.youtube.com/watch?v=kmwRomKtY-I

Thanks for your help !

Yoshi52

Quote from: Louisdebou on August 26, 2009, 02:39:05 PM
Hi guys,

Can i keep my nickname on a Brawl replay ? I think thats useful (especially for matchs w/ same characters) and i see this code in action (i think). See this video : that not a live match but a recorded replay and you can see the nickname "Mr. R" ! =>

Thanks for your help !

Replays With Tags
0404B140 38A00000

It saves the tags straight to the replay file itself in a way that can be accessed without cheats, I think... I never bother to remember who makes these codes, sorry. :'(

Louisdebou

Thanks for your quick help Yoshi52 !  :cool:
I'll try this code tonight.

JC-Gamer

I'm having trouble getting the Name Timestamp code to work. Can you tell me what I'm doing wrong? I want to move the third name at Data/Records/Group Records/pg. 4 to first for when I select my name in Brawls.

Name Timestamp [spunit262]
4A000000 90172E30
14YYYYYY XXXXXXXX
E0000000 80008000

My edited one:
4A000000 90172E30
14000248 FFFFFFFF
E0000000 80008000

I changed the YYYYYY to 000248 since 124*(3-1)=248 in hex.

Then, I changed  XXXXXXXX  to FFFFFFFF since that's the highest value possible.


Can someone please help?

OneUp

I'm not quite sure what the Name Timestamp is, but putting that big of a value in is probably a bad idea.

JC-Gamer

#73
Quote from: OneUp on August 27, 2009, 11:45:41 PM
I'm not quite sure what the Name Timestamp is, but putting that big of a value in is probably a bad idea.

I've also tried lower values like 99999999 all the way down to 00000032 (even all 0's which didn't move it down to the bottom either) with no luck. That third name I'm moving still doesn't go to the top. That's why I have a feeling I interpreted the code wrong and that either it does something totally different than what I thought it did or I did the math for the YYYYYY part wrong and it's something different than 000248 for the third name down.

Can someone who is familiar with this cheat please help me?

Also, (I might as well not make a new post) I want to replace a stage with another stage and I found a code that does that from Brawl+:

New Pork City is now Online Waiting Room:
C298D528 00000003
2C060031 40820008
38C00005 60000000
90DD08C0 00000000
C26DCEE0 00000003
A37A0022 2C1B0020 By changing this value, I was able to change which stage was going to be replaced. (duh)
40820008 3B600037 By changing this value, I was able to change which stage it would be replaced with. (also duh)
60000000 00000000

However, I want to change the stage to a target test level other than level one. To do this though I need a spot to insert the sub ID of the level I want. Is there a spot for it in this code? I didn't think there was so I looked for a code with a sub ID spot in it and found this one:

Stage Modifier Code
284DE4B0 00000188
4A000000 90180F08
10000033 000000SS
10000034 000000TT
E0000000 80008000
284DE4B0 00000181
4A000000 90180F08
10000033 000000UU
10000034 000000VV
E0000000 80008000
284DE4B0 00000182
4A000000 90180F08
10000033 000000WW
10000034 000000XX
E0000000 80008000
284DE4B0 00000184
4A000000 90180F08
10000033 000000YY
10000034 000000ZZ
E0000000 80008000
Hold button combination of your choice while loading a stage.
Do not activate a stage in mid battle!!!
D-Pad Up + A Activates Stage 1
SS= Stage 1 ID
TT= Stage 1 Sub ID
D-Pad Left + A Activates Stage 2
UU= Stage 2 ID
VV= Stage 2 Sub ID
D-Pad Right + A Activates Stage 3
WW= Stage 3 ID
XX= Stage 3 Sub ID
D-Pad Down + A Activates Stage 4
YY= Stage 4 ID
ZZ= Stage 4 Sub ID

I then took one of the four sub ID parts of this code and tried to merge it with the "replace stage code". I know nothing about codes and don't have a USB Gecko so that naturally, didn't work.



I know I could just use the 2nd code to get all 4 other levels of target test, but I don't like inputting button commands and trying to remember where I put what level is frustrating. I would much rather prefer if I could implement this into my Custom SSS Code [spunit262]. Could someone please either show me how to combine these codes together or actually do it for me?

Dadiro

Where can I find the animation modifier, the code that allows you to replace an animation with another one, I think I saw it somewhere but I can't find it. I would like to have a quick answer.