For some reason, I can indicate with a simple 04 code to set it to max which is 19-20. The thing is it doesn't register it when I do. Yes the number is there in the memory but the avatar's strength is none-existent. So, whenever I press the button it'll be the strength that is delivered even though the code is set.
the function is attached.
Here's the code that I've set up for it. This way when you fall on the green you can hit the ball gently.
28A55716 00000080
04DA6A14 00000019
E0000000 80008000
80DA6A14 = 814A0A78: 7D2EB92E stwx r9,r14,r23
Here's the registers
[spoiler] CR:84000084 XER:00000000 CTR:8002161C DSIS:02400000
DAR:80A59ADC SRR0:80021654 SRR1:00008032 LR:80042B60
r0:81000000 r1:80200D28 r2:801F7F80 r3:800E73F0
r4:80B81BE0 r5:80A59ADC r6:80A599B8 r7:001B8988
r8:801B8740 r9:00000001 r10:00000070 r11:80200D68
r12:8002161C r13:801F6AC0 r14:00000020 r15:80A599B8
r16:00000000 r17:00000000 r18:80A5A7E0 r19:80A5A3E0
r20:80A54F70 r21:0000003F r22:00000002 r23:00000000
r24:80150000 r25:FFFFFEFF r26:FFFFFDFF r27:80A5A7E0
r28:80A599B8 r29:80A54F70 r30:80A5A3E0 r31:003FFF01
f0:3F800000 f1:00000000 f2:43F00000 f3:40000000
f4:47000000 f5:FFC00000 f6:43A00000 f7:47079C00
f8:00800000 f9:47000000 f10:3F800000 f11:BB800000
f12:3B4CCCCD f13:00000000 f14:00000000 f15:46CF11BF
f16:40400000 f17:3F000000 f18:379E3F1B f19:00000000
f20:00000000 f21:00000000 f22:00000000 f23:00000000
f24:00000000 f25:00000000 f26:00000000 f27:00000000
f28:00000000 f29:00000000 f30:00000000 f31:3F991111[/spoiler]
Imagine a bar rising and falling and you get two presses. One for the strength and the other for accuracy.
This address is only for the strength for some reason.