I know, it seems like a noobish question, but maybe it isn´t.
I am trying to use a button activator to poke a specific value, but if the button is not pressed, nothing should write onto this adress!
aproach:
285944BE 00008000 -> button home
04662688 0000270F -> value to write
E2100000 00000000 -> if not...
... -> don´t write anything!
E0000000 80008000
which line do I need?
If the value writes itself back then all you need is
285944BE 00008000
04662688 0000270F
E0000000 80008000
if it doesn't then
04662688 XXXXXXXX
285944BE 00008000
04662688 0000270F
E0000000 80008000
XXXXXXXX=original value
no, I said nothing should write!!!
These are "life points" and I want the code to increase them when I press the button, but let me lose/gain them normally, if I don´t press it!
Then you should use the first one
sry but that's bullshit lol...
04 codes are for writing a value and not for doing nothing.
Quote04662688 XXXXXXXX
285944BE 00008000
04662688 0000270F
E0000000 80008000
you would write again a value by 04662688 XXXXXXXX.
idk but that's what i guess..
285944BE 00008000 -> button home
04662688 0000270F -> value to write
E2100000 00000000 -> if not...
0600270F 00000020 -> don´t write anything!
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
E0000000 80008000
No all he needs is
285944BE 00008000
04662688 0000270F
E0000000 80008000
This won't write ANYTHING unless the button is pressed
****but**** if he once pressed the button, he can't change it back!
Yes and there is nothing that can be done about that without writing to the address again
where the hell did you get the idea to write a string code of zeros beginning at the value he was going to write to 80662688?
sure it's possible.
if you activate any code, it start at 8000270F.
it writes: 285944BE 00008000 04662688 0000270F E0000000 80008000
and if you activate the 06 code, u can change it to 00000000.
0600270F 00000020 <--- starts at 0600270F and overwrite it with 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
E0000000 80008000
now it doesn't do anything more.
Quote from: Deathwolf on December 12, 2010, 01:22:26 PM
if you activate any code, it start at 8000270F.
Where are you getting this information from?
And how the hell does that let him "change it back"?
Quote from: Deathwolf on December 12, 2010, 01:22:26 PM
if you activate any code, it start at 8000270F.
it writes: 285944BE 00008000 04662688 0000270F E0000000 80008000
this wasn´t there as I applied the code...
Well this thread kind of exploded...
Quote from: wiiztec on December 12, 2010, 12:32:40 PM
If the value writes itself back then all you need is
285944BE 00008000
04662688 0000270F
E0000000 80008000
This is the answer for your question in the first post, Bully.
Ohh... so this is the same like this AR code?
Refill LP To 9,999 [Press: SEL+UP]
94000130 FFBB0000
1227F054 0000270F
6219CFE4 00000000
B219CFE4 00000000
00000000 0000270F
D2000000 00000000
unknown credit, don´t bother!
well... good to know.
using the converter (but in most times it gives out crap in my opinion ???)
[spoiler]
REMEMBER: When you Convert
these codes YOU DO NOT GET
CREDIT FOR THE CODE, it's
the EXACT SAME CODE that it
was for GameCube AR which a
hacker spent his/her time
on creating!!
2A27F054 0000270F
No WiiRD CodeType for GCN AR CodeType- 16bit signed greater next line.
E2000001 80008000
2C19CFE4 00000000
00000000 0027000F
2A000000 00000000
REMEMBER: When you Convert
these codes YOU DO NOT GET
CREDIT FOR THE CODE, it's
the EXACT SAME CODE that it
was for GameCube AR which a
hacker spent his/her time
on creating!!
[/spoiler]