WiiRd forum

Wii & Gamecube Hacking => PAL Wii Cheat Codes => PAL Wii Code Support => Topic started by: darkpavel on June 20, 2009, 03:29:26 AM

Title: One Piece Unlimited Cruise Episode 1 [ROUPAF]
Post by: darkpavel on June 20, 2009, 03:29:26 AM
someone can make the same code like japan version please
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on June 22, 2009, 08:58:07 AM
at least pls Max HP and MAx SP pls  O0
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Kirby26 on June 24, 2009, 03:05:48 PM
code to unlock all the characters please
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on June 26, 2009, 04:16:27 PM
i think you should  request codes that aren't already for the Japanese version of the game. like 2x exp for moves.

other codes like max hp and sp can be converted.

MY requests:

2x or higher exp for moves/skills
moonjump
99 of ..... item
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Franky・D・θάνατος on June 26, 2009, 04:33:01 PM
I don't mind about HP /MP codes, this game is not that hard  :rolleyes: , now i'm at the last island and i never did a single game over  :)

But another good code could be " always have break rush "
that would make taking items from enemies much more easier  ;D

Last year for One Piece Unlimited adventure i requested a character sawp code ( and now i request it for unlimited cruise episode 1 / 2 too )
like for Brawl where you can use the red/blue/yellow etc alloys, characters that you can't use normally, and i said it would be cool if you were able to use the bosses on story mode, like " swap luffy with: ener or aokiji etc "
I think it's not impossible, after all you can use the bosses in VS mode and Survival mode.. so why not a little code to bring them on story mode too?  :cool:

Maybe it would freeze if you try to use an item while playing as a boss.... but that's it.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on June 26, 2009, 09:33:20 PM
the game needs to be hacked more for those codes to come out.. codes for super smash bros. brawl and kingdom hearts II where huge requests. so for those games there will be hacked alot. but for one piece you need to have patience.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Kirby26 on June 27, 2009, 02:26:58 AM
Code to all orbe x10.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on June 27, 2009, 04:34:37 AM
the best code for this it would be a fishing code for

xxxxxxx xxxxxxxx = Catch a King of the sea
yyyyyy yyyyyyy = Catch a Shark

or Get an item = 99 of that item
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on June 27, 2009, 03:02:40 PM
just convert these codes to the pal version.

http://wiird.l0nk.org/forum/index.php/topic,1059.0.html (http://wiird.l0nk.org/forum/index.php/topic,1059.0.html)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on June 29, 2009, 02:49:57 AM
Ralph could you help us with that conversion because we dont know how to do that pls  :P
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on June 29, 2009, 06:06:53 PM
i dont know either. i think the code hackers are busy with other games. or are not interested in this game except for ZiT of course.
or its converting or its like hacking the same code again for the PAL version.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: xSHiNOx on July 01, 2009, 09:03:10 AM
what happened to ZiT anyways? i havent seen him post codes for like 2+ months or so. but man, its very tedious to go back to one place just to get 1 ingredient and repeat that like 30+ times?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Ruffy on July 02, 2009, 01:59:23 PM
Just got One Piece and it's awesome, anyway cheats would be appreciated  :D
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 04, 2009, 07:03:40 PM
Yeah, it'd be great if somebody who knew how could convert the codes.

I wish I knew how, but man, some tuts are confusing. :P
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 05, 2009, 12:55:51 AM
yes, some tuts are really confusing.
i´ve tried to find something on my own, but no chance.

in my opinion is the item code the most important, because farming mats is extremely boring and time consuming.

hope somebody can do us the favor to hack the game.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Blaster99 on July 05, 2009, 05:40:05 PM
Hi,

i would like to try porting the codes, but i am not at home atm. You have to wait until Wednesday when i am back home.

Bye
  Blaster99
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 06, 2009, 06:55:38 PM
that would be awesome.

thx in advance
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 07, 2009, 06:14:38 AM
Thank you in advance.

I agree that the items code should be put in the highest priority.

Hell, right now I'm farming Extra Large Sea Kings, Frozen Meat, and Mammoth Toads for the HP/SP giant dishes.  Granted, it isn't that bad, but bleh.  I already have 8/9 Straw Hat memebers' HP maxed out.  SP is still under 500 for all of them.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 07, 2009, 04:52:29 PM
cant wait for tomorrow:P he only ports the codes so dont expect new ones.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Panda On Smack on July 07, 2009, 04:56:28 PM
To port them to PAL you just need to find the offset
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 08, 2009, 04:02:02 AM
I remember reading about offsets and all that jazz in a guide at AR Central.  Problem is, I can't be bothered to waste time experimenting lol.  As of right now I'm working on changing the music in the game by hacking the brstm files like how people did for Brawl, but that's another story.

Besides, I already wasted time farming Sea King dishes in this game to get all the members' HP to 1000!  Don't wanna struggle through again working towards SP!
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 08, 2009, 04:16:45 AM
pls pls someone help us with the items codes or farming sea king or any other ingredient for sanji cooking
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Ruffy on July 08, 2009, 04:42:59 PM
I've made some cheats for Unlimited Adventure (US). Everyone got 2000 HP and SP and I've got all items, but the cheat corrupted the game, so my bags are always full. I could make some for Unlimited Cruise, but maybe I would corrupt your savegames as well :P
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 08, 2009, 05:00:04 PM
Thing is the saves that are highly useful are already made for the JP version.  Its just that they haven't been converted to the PAL version yet.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 09, 2009, 09:16:38 PM
is there any progress of the code porting?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 09, 2009, 11:29:01 PM
just have patience like me.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: goemon_guy on July 10, 2009, 12:55:34 PM
This game could have been hacked sooner, but not every single hacker has the game.

I might be getting a USB Gecko soon, so, I may be able to port/make new codes. (Not sure about making codes :P)

Just have patience :)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 10, 2009, 06:54:02 PM
Hi guys !!

I already did some codes for NDS Action Replay and I will be very interested in creating some code for Wii games expecially for PAL version of One Piece and Dragon Quest Swords.

I have only a question: to make codes for NDS it was sufficient to have an emulator to search in the allocated memory of games, but, how can I do it for Wii? It is necessary the USB Gecko to be able to access to the Wii memory or can I connect my Wii to PC via USB cable? To tell you the truth buying the USB Gecko is impossible for me right now !!!

THANKS to all the answers !!!  :P
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: goemon_guy on July 10, 2009, 11:49:23 PM
I just placed an order on a USB Gecko, so, I will try to port the codes.

As for connecting the Wii to the computer using a USB cable, I doubt it. As far as I know, the USB Gecko is programmed to be run through Gecko. I dont think that they can connect through USB to USB.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 11, 2009, 02:46:04 AM
Hey Ruffy could you post the codes you made for Unlimited Adventure NTSC?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 12, 2009, 03:03:32 AM
the codes from oneup doesn´t work it drains all your SP and you can´t refill it and the other code it down´t explain how it work
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 12, 2009, 03:22:01 AM
Sorry about the confusion.  The first code is applied with a button activator.  Any item that you put in the first four slots when 2 is pressed, you will now have 99 of that item.  As for the SP code, it may be something that has to be activated after the loading a save or something.  It works fine with USBGecko.  I'll try changing it to work without one.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 12, 2009, 03:24:06 AM
usb gecko maybe but i use Ocarina in Backup Loader Neogamma R4

and the first code i press 2 but doesnt work in the 4 slots =S can you post an image to tell us what 4 slots?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 12, 2009, 03:28:47 AM
Item slots in your inventory.  I'm also booting through the latest Gecko OS, not sure if that makes any difference.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 12, 2009, 03:41:18 AM
(http://i241.photobucket.com/albums/ff233/Ulrich_S/maybethis.jpg)

this slots or what slots because this 4 slots doesn´t work the cheat sorry for my bad english

es que yo hablo español xD
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 12, 2009, 03:54:55 AM
Yes, those are the slots.  Press 2 and you should get 99 of whatever items are in any of those slots.  I tried it through ocarina, and it worked.  If it doesn't work for you, then:
Try this code and see if it works. (This is without having to press 2)
42000000 90000000
007E2744 00000063
007E2754 00000063
007E2764 00000063
007E2774 00000063
E0000000 80008000
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 12, 2009, 04:00:28 AM
mmm better use it with a trigger button but that new code how does it work, after load the game the items are 99 or what?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 12, 2009, 04:01:42 AM
The original was with a trigger button - 2.  That code there is just without the trigger button, so it will always be 99 which could cause some problems.

Edit: Sorry forgot the address change take a look at the code above again.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 12, 2009, 05:16:43 AM
it doesn´t work either -o-´
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 12, 2009, 05:30:17 AM
Ok for his SP code it does work but it needs a trigger since it has to be activated after you load the save data.
28616540 FEFF0100
044D8C68 60000000

with this code press 2 on the wii remote after loading your save data to have unlimited SP.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 12, 2009, 05:34:02 AM
I just tried the item code by itself, and it works fine  :-\  Could someone else test the item code?

Edit: Sirlongshot thanks for pointing that out...can't believe I didn't think of that.  I tried a conditional statement based on how much SP Luffy currently had-that didn't work. Over-thinking things I guess.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 12, 2009, 05:36:54 AM
Anytime man you did the real work i was just tinkering and got lucky. the item code doesn't work for me either tho.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 12, 2009, 06:05:52 AM
One Up Sir Longshot thx the SP code works but someone can make an HP code pls T_T
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 12, 2009, 06:12:04 AM
Thanks for the item codeset.  I'm about to test it.  Think you could look into the instant level-up code ZiT has made for the JAP version?  I tried it out before on the JAP version, and its really efficient how it levels up a move per hit. 
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 12, 2009, 06:13:39 AM
Hm...I don't know why the item code isn't working for you.  Other than possible loader issues.  I'm using Gecko 1.9.0.1 to hack the codes and it worked fine booting the sd codes through there as well.  Also: hooktype is default.

Undeniable-that's assembly code, which I'm just learning some of it.  I've been trying to make a moonjump code, but something is awry with the assembly code I'm messing with and it won't convert it to WiiRD.  I might be able to do the level up code though by finding the values and plugging them into his assembly code.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 12, 2009, 06:46:25 AM
Im using the latest Gecko OS also and default hook type. Items still don't change.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 12, 2009, 07:10:18 AM
I couldn't exactly get the item code to work.  Probably cause I didn't convert it to a gct file properly. =/  Bah, I'm tired so I'll go to bed.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 12, 2009, 09:03:41 AM
Couls someone of you, please, make a list of tested codes that works with the PAL version of One Piece Unlimited Cruise?

THANKS !!!    ;D
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 12, 2009, 11:24:58 AM
is the item code posted a page back, with or without pressing 2?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 12, 2009, 01:23:53 PM
The one a page back is without pressing 2, and the one under code releases is with pressing 2.  Both work for me, but not sure why they don't work for anyone else so far.

Post Merge: July 12, 2009, 07:09:53 PM

OK, to clarify on how the item code works:
1. Put an item in any of 1st 4 slots in inventory.
2. Press 2
3. Refresh the inventory (move item or leave inventory)
4. You should have 99 of those items in those 4 slots.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 12, 2009, 09:42:40 PM
From Unlimited Cruise 1 PAL/FR

it doesn't work pal.  :-\
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Romaap on July 12, 2009, 09:58:58 PM
The difference in languages can be the problem, some games have a different memory layout for every language.
I encountered the same problem with Animal Crossing.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 12, 2009, 10:24:26 PM
Thanks, Romaap that appears to be the problem.  I tried booting it in spanish, and the code didn't work.  So I'll create the code in Spanish, French, and any other takers?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 12, 2009, 11:07:56 PM
english?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 12, 2009, 11:28:06 PM
I was pretty sure the original one i hacked was English...Gecko language was set to default, and my console default is English.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 12, 2009, 11:51:16 PM
same here..i dunno maybe i got a strange game or something.
I even tryed changing the languages to the one's you just put up and still nothing.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 12, 2009, 11:52:45 PM
Yeah I can't get it to work.  I created a GCT file using the pc CodeManager.  Could you send me a gct file (the one that requires to press 2) for the item code?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 12, 2009, 11:54:04 PM
Need code in German.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 13, 2009, 12:23:07 AM
just finish the codes in english. and then you can put them in other languages if you want.

Germans, Frenches , Spanish's  , Italians, (i dont have anything against them) but they always want it in their own language.

GOD dammit learn some decent English. its not that hard. Dutch people like me are an BIG example.

to keep it short. Set you language on your wii to English and play with the English codes.

arigatou.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 12:28:50 AM
Angry man is angry.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 12:31:31 AM
I thought I got the items working in English, then Spanish, then French...here is a gct file for someone to try.  It has all three press 2 codes in it.
http://cbtech.sepwich.com/oneup/ROUPAF.gct (http://cbtech.sepwich.com/oneup/ROUPAF.gct)

These codes are also updated under the codes section.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 12:39:44 AM
Out of curiosity, what's your setup with the items?

I have both Bag Upgrades, and both Equippable slot upgrades.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 12:41:48 AM
I've got no upgrades...that could change things.  I haven't played it much so far just to the second island with minimalistic collecting.  Maybe I could have a look at your save file or you could try a new file and see if it works?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 12:42:18 AM
i only have the 1st bad upgrade..maybe that is why it wont work.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 13, 2009, 12:45:24 AM
I know what you mean ralph9994, but the codes aren´t for me.
I need the German codes for a friend of mine, with absolutely no English knowledge.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 13, 2009, 01:12:24 AM
ok guy's, i have check this out and, when you change
the language WII, country either, this does not affect the game...

Like mine, once i put the wii in ENGLISH United Kingdom, the game continue to start in FRENCH (no change)

I've use your GCT OneUp, on lastet GeckoOS 1.9.1
and my savefile got all the upgrade's

the thing won't work again  :'(

Pretty strange heh ...
But thank's for your efforts  ^-^
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 01:12:43 AM
Tried with a new file and it still doesn't work.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 01:14:55 AM
You can use Gecko to boot up in a different language.  But I haven't gotten it to work.  I also tried doing it in Spanish on a new/old save file.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 13, 2009, 01:22:47 AM
oooh! that's the trick!  ;D
good! now the game starting with ENGLISH sub's

but, you know what?  :-\ doesn't work either

Jeez!
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 01:59:49 AM
Do all of you have PAL wiis?  Mine is NTSC...that could be a problem but I wouldn't think so.  I also have to use the force NTSC option in Gecko.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 02:21:22 AM
I live in South Florida mang.

I also use Force NTSC.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 03:37:36 AM
same here..use FORCE NTSC and all.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 03:56:58 AM
Maybe you could elaborate what you're doing exactly, OneUp?  Like are you doing it on an island?  Which character you're using?  What items it'll work on?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 13, 2009, 04:04:44 AM
OneUp could you give us the code for the items in spanish, the code pls not the GTC
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 04:16:20 AM
He has the codes posted on his other thread.
Press 2 for 99 of Inventory slot 1-4 (Spanish)
28616540 FEFF0100
42000000 90000000
007E23E4 00000063
007E23F4 00000063
007E2404 00000063
007E2414 00000063
E0000000 80008000
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 13, 2009, 04:18:00 AM
oh yeah thx Sirhookshot

but Oneup the code still doesnt work :S
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 04:18:43 AM
At the time of hacking the Spanish/French codes, I was Zoro on the Thousand Sunny.  And they seem to work for any item, even crystals which "require" more than one item space.

Could one of you send me your save file or something? I honestly don't know why it's not working...
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 04:21:05 AM
would it help if i sent you one of my saves Oneup?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 04:23:02 AM
If the codes don't work for you, it might help me fix them.  I may be leaving out a pointer or something, but I haven't had a problem with the code I made, and I've gone to the first two islands and the sunny, and it works on all three so far.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 04:24:11 AM
ok i'll transfer my save to pc and send it to you. how would you like me to send it?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 04:25:28 AM
Just go ahead and post it here.  It might help others, who knows.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 04:27:30 AM
doing it now. thanks for all your help.

Post Merge: July 13, 2009, 04:36:48 AM

heh..not to sound newbish or anything..but how do i upload it here? I have my save on my computer.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 04:39:47 AM
Use any file uploader - sendspace, megaupload, rapidshare etc.  I use my own site to upload stuff though.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 04:42:12 AM
http://www.megaupload.com/?d=4YCOWN5B (http://www.megaupload.com/?d=4YCOWN5B)
Thanks Again.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 13, 2009, 05:07:08 AM
oneup could you pls give me your msn pls to send you the file?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 05:14:00 AM
I don't quite know what to do to fix these problems that you guys are having.  I booted Sirlongshot's savefile, and the codes worked fine.
Screens: The target here is the brown fruit.

Before the code:
(http://cbtech.sepwich.com/oneup/opc10.bmp)

After the code:
(http://cbtech.sepwich.com/oneup/opc11.bmp)

After Refreshing:

(http://cbtech.sepwich.com/oneup/opc12.bmp)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 13, 2009, 05:20:37 AM
OneUp here is my SAVE

http://www.megaupload.com/?d=KHYBHEM8 (http://www.megaupload.com/?d=KHYBHEM8)

use it wisely Oo

i play the game in Spanish so pls try that

other question

the code works with items like "Atun Elephant" or something like that that use 1 slot?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 05:22:15 AM
strange...im using the latest gecko os and everything...hmmm..
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 05:35:37 AM
Latest is 1.9.1, NOT 1.9.0.1, right?

Post Merge: July 13, 2009, 05:50:39 AM

Also, could a reason be that we aren't using a USBGecko?  Also, you're not in any special mode when you try the cheat right when you load up the launcher?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 06:06:57 AM
Undeniable, I had been loading it with debugger on - this allows me to launch WiiRD at any time not just beginning, but I just tried it with only SD Cheats on and it still works :-\
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 06:22:56 AM
I know we've been asking a lot, but could you try it without the USB Gecko inserted if possible?

Post Merge: July 13, 2009, 06:38:09 AM

Also, where do you have the gcf file?  sd:/codes/ ?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 06:50:35 AM
I tried with my USBGecko out, still works.  The gct file is under sd:/codes/ROUPAF.gct  I created the .gct with the first Code Manager (bundled with ocarina) if that matters, and I used all of the codes at once.

I can't seem to make the codes fail...

Ok Various Configurations that I've gotten to work:

Gecko OS
Lang: English/Spanish/French
Force NTSC
Hooktype: Default
Debugger: On/Off
SD Cheats: On

NeoGamma
Lang: English/Spanish/French
Force NTSC 480i
Hooktype: VI (buggy)
Ocarina: On CIOS
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 13, 2009, 07:44:18 AM
Hey guys, not to be boring but I would like if someone of you could provide some code for italian version.

I would like to say that the most of the players have not experiencing in hacking game so they can't do it by themselves. I think that if you find a code for a version it is not too long to provides code for others language. You have also to remember that if you did something like found cheats you did because you like it and to make a service to all the people that wiil use your code and stay sure that they will appreciate your work a lot (like me).

I could also say that I would to make you a help but I don't have an USB Gecko and know I'm seroiusly planning to buy one so, please, 'till that moment be kind enough to make also codes for others language !!!

THANK YOU A LOT !!!!!    :)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 02:26:58 PM
Hey OneUp could you send me my save back with all the fruits and good stuff at 99?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 13, 2009, 02:54:46 PM
well if the codes (SP and 99 item slot thing) do not work at the same time, then i got a problem. i enable them both but only the SP code works. is that normal?

and when will the codes be posted on  the database?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 03:48:50 PM
I've tried tons of different ways and can't get it to work at all. The SP code works great tho and im thankful for that.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 13, 2009, 03:52:13 PM
tried the codes but the Item code didn´t work for me. Sp code works flawlessly.

setup

Pal Wii
Gecko OS 1.9.1
Lang: English
Video format: Pal 576i 50Hz / Pal 480i 60Hz
Hooktype: Default
Debugger: On/Off
SD Cheats: On
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 04:14:32 PM
Yes, after getting the original the other languages are easy.  Seeing as how no one can get them to work, I might try finding a different code first because it's not very likely that German/Italian will work any better than the rest.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 13, 2009, 04:20:18 PM
do you need to do the 99 item slot code individually? or can you use it together with the sp code??

if you must use it alone without any other code then amma try that out. but otherwise it doenst work for me to. and i waiting for it to come  in the database so i can choose the codes on my wii instead of doing it on my pc.

Oneup maby you can send us your .gct file. maby that works?? you never know. im doing the exact same thing as you exept im running of an usb stick and i dinnt use the first code manager (if that matters).
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 04:23:44 PM
ralph if im not mistaken you can use them both together. i have tried it both ways and it still doesnt work for me..sp does work tho.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 13, 2009, 04:35:08 PM
OneUp, how do you searched the codes? I´ve got a USB Gecko and maybe i can help you.
Maybe its the difference from NTSC Wii to PAL Wii.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: goemon_guy on July 13, 2009, 04:39:11 PM
I have been able to use the codes flawlessly. Here's my setup:

NeoGamma:
Language: English
Video Mode: NTSC:480i
Ocarina on: CIOS
Hook Type: VI

I am also able to use them both at the same time.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 04:48:51 PM
Great to know that someone got it working.  I've used all three item codes and the sp code at the same time.

Kain if you want to take a look, the codes are in the 90 range.  If you don't know how to find codes, look at Foxx's video tutorial or Dexter0's written one.  Look for both in the sticky in the collective.

I already tried giving my gct file to sanjikun, but it didn't work. I'll post it here if someone wants it.
http://cbtech.sepwich.com/oneup/ROUPAF.gct (http://cbtech.sepwich.com/oneup/ROUPAF.gct)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 13, 2009, 05:01:39 PM
k i´ve searched only in the 80´s  range so far with no luck, now i know why.

whats the data size in this case?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 05:12:24 PM
I used 8 bit, and I also just found some similar values in the D0 range but then the game crashed... You'll probably end up with two codes-one for the slot and one for the actual item.  I think 907E.... was the slot .
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 13, 2009, 05:31:49 PM
lol even with your gct file i didnt work.. i loaded from my USB stick but i dont think thats the problem. i assume the oher have used the disk version.
whats the problem?? naa i just wait for the other codes.

SP works at least.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 13, 2009, 05:35:02 PM
so at first i tried with my save which has the bag 1 and slot 1 upgrade

90797724 00000063
90797734 00000063
90797744 00000063
90797754 00000063

then i started a new game and the codes for the first 4 slots are

90797684 00000063
90797694 00000063
907976A4 00000063
907976B4 00000063

I played in English.

             28616540 FEFF0100              
             42000000 90000000
             00797684 00000063
             00797694 00000063
             007976A4 00000063
             007976B4 00000063
             E0000000 80008000

so this should be the codes for bag and slot without upgrades and the press 2 command.

after going back to the title screen and load the same save game the codes don´t work anymore. I´ve looked at the address of the 1st item slot and the value doesn´t show the item amount.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 05:49:18 PM
Yeah the slots seem to move a bit after a upgrade.  notice the only changes there are the 2 next to last digits.  Starting at 68 vs 72. Maybe I should see if there is a pointer involved here, but the codes have worked fine for me on both types.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 05:51:04 PM
Now I'm interested in seeing what the code will be for those (like me) with both upgrades for Slots/Bags each.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 13, 2009, 05:56:43 PM
So now are the codes exactly the same as of the bag/slot 1 upgrades, but I play on the bag/slot 0 upgrades save.

And the bag/slot 1 has now the addresses of the bag/slot 0.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 06:15:14 PM
I didn't quite understand what you just said, but i tried a couple of pointers and they all led back to the same address.  Also I'm using a save file that has 2 slot and 2 bag upgrades.  I'm getting the same addresses.  If someone wants to try the variation of Kain's it's:
28616540 FEFF0100
42000000 90000000
00797724 00000063
00797734 00000063
00797744 00000063
00797754 00000063
E0000000 80008000

Also I got the codes for the German/Italian, and I'll post those in the other thread.  I'll have to continue work on this this evening.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 13, 2009, 06:31:03 PM
I reseted my Wii and start the search again. This time are the addresses

90797684 00000063
90797694 00000063
907976A4 00000063
907976B4 00000063

maybe there are two areas where the item values can be stored.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 06:57:44 PM
I just tested Kain's variation you posted OneUp and it WORKED!

Gonna test again by restarting the Wii.

Post Merge: July 13, 2009, 08:58:29 PM

There was another guy that said it worked also, this is why I tried it:

(he reposted lol)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 13, 2009, 07:02:09 PM
OneUp, that cheat :

28616540 FEFF0100
42000000 90000000
00797724 00000063
00797734 00000063
00797744 00000063
00797754 00000063
E0000000 80008000

Work's clearly on my game with :

GeckoOS 1.9.1
Game Language : ENGLISH <- (Important)
Gecko Hook Type : Default <- (Important)
SD Cheats : YES

Without these two's options, the cheat won't working

Good stuff !  O0
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 07:04:44 PM
LOL, and there's his (re)post.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Romaap on July 13, 2009, 07:05:15 PM
Quote from: Kain on July 13, 2009, 06:31:03 PM
I reseted my Wii and start the search again. This time are the addresses

90797684 00000063
90797694 00000063
907976A4 00000063
907976B4 00000063

maybe there are two areas where the item values can be stored.
Or maybe its needs pointer :P
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 13, 2009, 07:20:22 PM
now i got all the nine character's with full maxed power, hahahahah !!!  >:D >:D >:D

Thank you very much !  :D
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 07:27:02 PM
This cheat that kain posted does work good on my system too One Up.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 13, 2009, 07:33:20 PM
so ive got 1 bag upgrade and one slot upgrade. witch code do i need to use them??
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 13, 2009, 07:36:58 PM
it doesn´t matter if you have a bag upgrade or not. sometimes works the first code, sometimes the other.

i m working on a pointer version, which should cover both.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Sirlongshot on July 13, 2009, 07:47:45 PM
now all i need is to find a stinking magnet in the game!
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 13, 2009, 08:05:30 PM
Quote from: Sirlongshot on July 13, 2009, 07:47:45 PM
now all i need is to find a stinking magnet in the game!

The little robots in Island 1.  On Normal mode they hardly spawn in the basic locations.  You'll find them on the side paths, especially near the optional boss fight.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 13, 2009, 08:35:50 PM
Quote from: Kain on July 13, 2009, 07:36:58 PM
it doesn´t matter if you have a bag upgrade or not. sometimes works the first code, sometimes the other.

i m working on a pointer version, which should cover both.

so its like:

Start up game
Got to items
Press 2
go back
Got to items.
(normally your done now)
Doesnt work
Reboot
Start up game
Got to items
Press 2
go back
Got to items.
(normally your done now)
Doesnt work
Reboot
Start up game
Got to items
Press 2
go back
Got to items.
(normally your done now)
Doesnt work
Reboot.

and soo on?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 13, 2009, 08:39:05 PM
Hey Kain, how did you find those other addresses? Was it with 1 bag, 1 slot upgrade?  Or has it varied on your searches, or have you changed any gecko settings etc.  If those addresses work, that's great.  I wonder if they will work for me...who knows I'll see when I get home.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 13, 2009, 09:15:10 PM
I´ve startet with my save game (slot 3)

Pal Wii
Gecko OS 1.9.1
Lang: English
Video format: Pal 576i 50Hz / Pal 480i 60Hz
Hooktype: Default
Debugger: On/Off
SD Cheats: On

searched for codes and found

90797724 00000063
90797734 00000063
90797744 00000063
90797754 00000063

then I saved and go back to title screen and started a new game (slot 1) and found

90797684 00000063
90797694 00000063
907976A4 00000063
907976B4 00000063

then I reseted my Wii and load my save game (slot 3) and the addresses for slot 1 save game were the right one.

I saved the game and got back to title screen to load my save again (slot 3) and got the first addresses to work.
I think its random which of the addresses are uses. Sometimes they changed every time i load and sometimes i got the same addresses 3 or more in a row.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 13, 2009, 09:15:36 PM
lol ralph9994

Just do this suit :

1 ) put these lines in your ROUPAF.txt (in the folder called "txtcodes", from the root SD)

99 items (by Kain feat. OneUp lol)
28616540 FEFF0100
42000000 90000000
00797724 00000063
00797734 00000063
00797744 00000063
00797754 00000063
E0000000 80008000

2 ) put the SDCARD on the Wii  ::)
3 ) Start the Wii, and go to the Homebrew Channel
4 ) Go to the CHEAT MANAGER homebrew and creat 1 .CGT file with the cheat (then press HOME)

Now

5 ) Start Gecko OS 1.9.1
6 ) Go in the "Config Option"
7 ) Confirm these lines :

Game Language : ENGLISH
Gecko Hook Type : DEFAULT
SD Cheats : YES (Then press B)

8 ) Lunch the Game from Gecko OS
9 ) Load your save, go outside the Sunny and open your Item Bag, put any item on the 4 first cases

and then, Press "2" Boutton (from the Wiimote lol)
Close the Bag, and go inside again, and voila! 99 item's  ;D
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 13, 2009, 09:24:49 PM
ima try burn the game to a disk see if thats working. but the sp was working so i think there is no diffrence.

BTW oneup. you should join the hackers so you can put the codes onto the database. :P  http://www.usbgecko.com/codes/index.php?chid=R&r=*&hacker=join (http://www.usbgecko.com/codes/index.php?chid=R&r=*&hacker=join)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 14, 2009, 02:36:29 AM
To everyone having trouble with these ram write item codes, go check the other topic.  I updated it with an assembly based item code that allows you to cancel the subtraction of items, turn it back on, and change it to addition.

Edit: So far it seems to be region free.
Ralph, I'm still fairly new to hacking things, and they want to see that you've done a few codes or whatnot.  I've only hacked a few codes for this game and Okami, but I do plan to join that database asap.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: SanjiKun on July 14, 2009, 03:08:29 AM
ok Oneup help me last night with the codes and i make it work the config was the next

NeoGamma: R6
Language: English
Video Mode: NTSC:480i
Ocarina on: CIOS
Hook Type: VI

the GCT is the one oneup put in one of this post so

one up thx for all men ^^
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 14, 2009, 09:03:27 AM
hey guy's

Can you do a cheat to have infinite Attack EX
That attack when you do the combination, and get rabies

it's very usefull to drop items from any enemy
but particularly to drop the famous rare maps !  :P
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: MauriiDS on July 14, 2009, 09:57:40 AM
I tested this cheat of OneUp:

"Press 2 for 99 of Inventory slot 1-4 (Spanish)
28616540 FEFF0100
42000000 90000000
007E23E4 00000063
007E23F4 00000063
007E2404 00000063
007E2414 00000063
E0000000 80008000"

It works only if you press 1 & 2 buttons the same time. Also, after playing a while I get a new item but it says that my inventory is full, and I have 9 empty slots. If you save your game that "effect" will stay forever.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 14, 2009, 12:34:25 PM
Quote from: MauriiDS on July 14, 2009, 09:57:40 AMIt works only if you press 1 & 2 buttons the same time. Also, after playing a while I get a new item but it says that my inventory is full, and I have 9 empty slots. If you save your game that "effect" will stay forever.

Try to fill all your slot with item from the deposit and then move all away in the deposit itself; this worked for me. The trick is to not multiply items if there are void slot between 1st and 4th.

Let me know !!!
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 14, 2009, 01:49:01 PM
..give these a try, I've only just started so I'm not sure if all items are accounted for with the item mod code.

Infinite Items
0777D098 00000010
38000063 981F0004
7FC3F378 4A976D5C
040F3DFC 496892A4

Item Modifier
0777D030 00000038
809F0000 3D608065
816BF9D8 2C0B2800
40820024 3D602000
7C0B5000 40820018
38840001 2C0400B2
40810008 38800001
909F0000 4A976D98
040F3DF8 49689238
(Hold Z and Press A to change selected Item)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: goemon_guy on July 14, 2009, 01:52:10 PM
I am gonna go and try them out now, I'll post back with my results ;)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 14, 2009, 02:06:11 PM
can anyone post his ROUPAF.txt? i cant get it to work in the cheat manager it says its empty but its not.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 14, 2009, 03:01:50 PM
Amazing TNTkryzt  :o

Infinite Items and Item Modifier works nicely ! ;D

ralph9994 : http://www.mediafire.com/download.php?rz4y0mxijlu (http://www.mediafire.com/download.php?rz4y0mxijlu)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 14, 2009, 03:17:07 PM
ok tnx

the item modifer works. but what about inf items?? i havend test it yet but i think if you need 30 of the same item but you only have 5 that if you want to develop somthing it does not work because it says you have 5 but you have the code on.

or if you have your code on evrything goes to 99?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 14, 2009, 03:24:07 PM
I'm not very far in the game but if there are tasks that require a specific amount of an item then there'll most likely be another check somewhere, I'll look into when I encounter such a task.

Moon Jump
2264F9D8 00000400
040290E0 D0230050
E0000000 80008000
2064F9D8 00000400
040290E0 60000000
E0000000 80008000
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 14, 2009, 03:30:53 PM
Everything in your bag goes to 99  :cool:
oh but some items like fish meet do not change

Moon Jump <-- haha, best thing ever  O0 (works!)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 14, 2009, 03:51:39 PM
o btw i could not get furter on the 3rd island so i got the second suck thing (srry i dont know whats named agian) but i you get that with the item modifier it freezes when you want to use it.  does anybody know what you need to get the second suck thing??
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 14, 2009, 05:49:06 PM
one more for the night I think,

Access all Characters
040409CC 38000001
040409D0 900301CC
04124CEC 2C000000
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Undeniable on July 14, 2009, 06:14:55 PM
What do you mean access all characters?  Hopefully you mean Versus mode, not Single Player mode. XD
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 14, 2009, 06:25:38 PM
Acces all characters without all map's, it's not legit at all  :-\

please, give us the infinite RUSH-BREAK !!!  :D
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 14, 2009, 06:40:59 PM
Alright heres one for versus mode;

Unlock all Characters (Versus Mode)
0420FC50 38000001
0420FC54 90030158
0420FC58 4800002C

Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 14, 2009, 08:02:39 PM
is there any guide for the materials you need to make the items like the super vacuum cleaner? because if you put an item ito your storage it says : idea!! and then you can make it. because if you use the code for item modifier it freezez when ou want to use it.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: xSHiNOx on July 15, 2009, 04:44:33 AM
i like to thank you OneUp for the item code. now all my characters are 1000 hp and sp and are ready for episode 2! i have 61% on my file...

can rush breaking enemies make them drop map pieces or do i have to keep fighting until they drop one?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: OneUp on July 15, 2009, 05:49:52 AM
In my attempts to create an assembly HP code, I ended up with something quite interesting:
Try at your own risk.

1 hit KO
//removed for the moment  Seems to corrupt your save in some way - you don't start with full health on the sunny and dead crew remain dead.

This code makes enemies have low health best I can figure. Unfortunately it also makes you unable to heal yourself, so it is good and bad.  I'm not posting this in code release unless I can remove the bad, but it's something fun to play with I guess.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: xSHiNOx on July 15, 2009, 06:30:20 AM
so i just tried that unlock all characters for vs mode code above. it works but it doesnt save meaning you would have to load that code each time you want to do vs mode. still, good code and thanks for it.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 15, 2009, 07:36:16 AM
Yeah I'll have to trace it back to find the real flags. Updated the inf items codes as it wrote to all unoccupied storage slots.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 15, 2009, 11:39:59 AM
i see you added the have infinite hp and sp code. does it work correctly??

and for the have all development items, i think i need a little more explanation. (if you have all the development items the sp.moves of the characters must be also unlocked)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 15, 2009, 11:46:54 AM
..no I've had to edit the hp code again as the character check was unreliable. The "development" and "mission" item codes basically bypass the "have correct item" check, it'll only function during that event.

Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 15, 2009, 11:59:51 AM
well because this game was not released in the NTSC region. there arent any guides for it. so i dont know what you need to make a super vacuum cleaner. for example you need clay and a special fish. the "IDEA!!" is not triggered if you only have the clay. you need to have that special fish i order tho trigger that "IDEA!!" thing.
i cant get any further now. (i need that vacuum cleaner:P)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 15, 2009, 12:14:33 PM
Well I haven't  got that far yet, I've only played as far as reaching Sunny but I'm sure the dev code should work if not I'll have a look when I get there. Have you tried gamefaqs, they have a basic walkthru.

You have to be on Sunny to use the developement fuction and so far the dev code has worked on all tasks.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: AsatanuKain on July 15, 2009, 02:44:52 PM
The part needed for the Vacuum upgrade is on island 3 there is some point where you must build a ladder and then you must go left and then right into the cave until you reach an chest.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 15, 2009, 03:00:01 PM
Hi TNTkryzt, did you notice that your Infinite HP+SP code heals also the boss HP gauge so that win the battle is impossible?  :P

Another thing, the SP code got infinite SP if you don't use special attach: if a special attach is performed the yellow bar will be consumed and you cannot fill it anymore !!! Take a look at it.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 15, 2009, 03:51:59 PM
Are you using the latest inf hp+sp code from the main code thread (http://wiird.l0nk.org/forum/index.php/topic,3810.new.html#new) because I've used it against the first 2 bosses and it worked fine. As for the sp yellow bar, I'll look into that tomorrow.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 15, 2009, 04:59:41 PM
Quote from: Kain on July 15, 2009, 02:44:52 PM
The part needed for the Vacuum upgrade is on island 3 there is some point where you must build a ladder and then you must go left and then right into the cave until you reach an chest.

wel im bugged. i got the mystery upgrade and nothing happed. so im stuck now forever..... and sometimes i got 2 super vacuum cleaners.(from the item modifier) but one freezez and you get an annoying peep and the other works but you cannot suck up that poison stuff before the boss. so i cannot go any further in this game DAMMIT
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 15, 2009, 06:43:37 PM
Quote from: TNTkryzt on July 15, 2009, 03:51:59 PM
Are you using the latest inf hp+sp code from the main code thread (http://wiird.l0nk.org/forum/index.php/topic,3810.new.html#new) because I've used it against the first 2 bosses and it worked fine.
Yeha I'm using it but I have to say that I'm playing with the italian language of the PAL version... I don't know if it matters !!!

Another thing: the longer break rush for me doesn't work !!! It has the opposite effect that's to say that the break rush last only one strike !!!
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 16, 2009, 01:02:05 AM
Quote from: Apache81 on July 15, 2009, 06:43:37 PM
Yeha I'm using it but I have to say that I'm playing with the italian language of the PAL version... I don't know if it matters !!!

Another thing: the longer break rush for me doesn't work !!! It has the opposite effect that's to say that the break rush last only one strike !!!
The language may be the cause or something changes down the line, which boss (number if possible) did you notice the problem at?
I can't make an infinite break rush code as it needs to reset after the battle, best to just use the attain break rush quickly code.
I've edited the hp+sp code so it should refill after using a special move, also had to edit the inf items code as the hp+sp code ran into it's space, so don't use the old inf items code with the new hp code.

Infinite HP+SP
0777D078 00000024
807F003C 2C0C0000
40820014 81630004
91630000 81630018
91630014 91630010
4A9B1F20 00000000
0412EFB4 4964E0C4

Infinite Items
0777D0A0 00000010
38000063 981F0004
7FC3F378 4A976D54
040F3DFC 496892A4
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 16, 2009, 07:38:35 AM
The boss was Bartolomew Kuma... the first one !!!
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 16, 2009, 08:00:14 AM
Try this one, if it works thats great if not then I can't help you with that language as I'd need to delete my save to change language (I don't even remember seeing a language selection screen??)

(edit, this one works in versus not story mode, I'll have a look later)
Infinite HP
0777D078 00000024
7C63002E 2C040001
40820018 81630034
816B0000 816B003C
818B0004 918B0000
4AA64540 00000000
041E15D4 4959BAA4
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 16, 2009, 12:27:26 PM
you can change game language by simply chancge wii language or by forcing a language from Gecko.
I'll try the cheat and I'll let you know.
However I've just received my USB Gecko so after the job this evening I'll be able to also help you and myself   :-P
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 16, 2009, 01:40:02 PM
Thats good to hear, there's still a lot more that needs to be hacked.

This one also needs to be tested, the break rush sign may disappear but the effect should stay.

Infinite Break Rush Effect
0402F3C4 901F0068
0402F41C 38000001
0402E9CC 60000000

Infinite GP
06024488 00000010
380003E7 B0060000
B006000C A886000C

Database Complete
060F3658 00000014
3C00C000 90030008
396001F4 91630000
38600001 00000000
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: NamiFeet on July 17, 2009, 09:44:29 AM
Honto Arigato TNTkryzt kun !  :D :D :D
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 17, 2009, 11:13:35 AM
Thats enough from me on this game, the latest unlock codes are savable;

Unlock all Characters (Story Mode)
040409CC 38000001
040409D0 900301CC
04124CEC 2C000000

Unlock all Characters (Versus Mode)
42000000 90000000
0807D1E0 FFFFFFFF
20070004 00000000
E0000000 80008000

Unlock all Battle Zones
42000000 90000000
0407D214 FFFFFFFF
E0000000 80008000

Unlock Character & Music Databases
040F52A4 3800003F
040F52A8 98030018
040F52AC 38600001

Creature Database Complete
060F3658 00000014
3C00C000 90030008
396001F4 91630000
38600001 00000000

Access all Lv.3 Upgrades
04074184 38000003
040F58F4 3800000F
040F5900 98050004
(May cause progress issues, Use at own Risk)

Have all Skills
0777D0B0 00000014
3960FFFF 91630010
9163001C 80630010
4A8F9EDC 00000000
04076F98 49706118

Master Available Skills
0777D0C4 00000010
3960000A 99630000
88630000 4AABAFB4
04238080 49545044

Attain Break Rush Quickly
0402EAB8 38000001

Infinite Break Rush Effect
0402F3C4 901F0068
0402F41C 38000001
0402E9CC 60000000

Infinite HP+SP (Versus Mode)
0777D114 0000002C
7C63002E 2C040001
40820020 81630034
816B0000 816B003C
818B0004 918B0000
818B0018 918B0010
4AA6449C 00000000
041E15D4 4959BB40

Infinite HP+SP (Story Mode)
0777D078 00000028
807F003C 2C0C0000
4082001C 396001F4
91630004 91630000
91630018 91630014
91630010 4A9B1F1C
0412EFB4 4964E0C4

Infinite GP
06024488 00000010
380003E8 B0060000
B006000C A886000C

Infinite Items
0777D0A0 00000010
38000063 981F0004
7FC3F378 4A976D54
040F3DFC 496892A4

Have Mission Items
040F3DA0 7C042000
040F3DB8 38600063

Have Development Items
040F50D4 7C042000
040F5100 38600063

Item Modifier
0777D030 00000038
809F0000 3D608065
816BF9D8 2C0B2800
40820024 3D602000
7C0B5000 40820018
38840001 2C0400B2
40810008 38800001
909F0000 4A976D98
040F3DF8 49689238
(Hold Z and Press A to change selected Item)

Moon Jump
2264F9D8 00000400
040290E0 D0230050
E0000000 80008000
2064F9D8 00000400
040290E0 60000000
E0000000 80008000

Speed Modifier
0777D0D4 00000040
3D608065 816BF9D8
2C0B4008 4082000C
3D804000 91830004
2C0B4001 4082000C
3D803F80 91830004
2C0B4004 4082000C
3D803F00 91830004
C0230004 4AD5B894
044D89A0 492A4734
(Press C+Up = Fast, C+Lft = Normal, C+Dwn = Slow)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 17, 2009, 01:17:16 PM
im stuck on a problem in game while using codes.

http://i29.tinypic.com/abo29s.jpg (http://i29.tinypic.com/abo29s.jpg)

can i use the infinite GP code for it??.

and can you add your codes to the database??
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 17, 2009, 03:23:26 PM
Should do, the GP code gives you 9 of all parts. The "Have Mission Items" will help if you don't have the required items.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: xSHiNOx on July 17, 2009, 06:47:40 PM
savable unlock all characters for vs mode huh? does it include the characters on the bottom? ill try it later
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 17, 2009, 10:01:03 PM
Quote from: TNTkryzt on July 17, 2009, 03:23:26 PM
Should do, the GP code gives you 9 of all parts. The "Have Mission Items" will help if you don't have the required items.

lol you should edit that code:P

because there are 10 instead of 9. im now at the final island and you need 10 for it.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: xSHiNOx on July 17, 2009, 10:23:52 PM
ahh, the unlock all vs characters unlocks even the bottom ones. it's savable too. thank you for that code!

is it possible to make the enemies drop treasure map pieces?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: TNTkryzt on July 18, 2009, 04:00:36 AM
Quote from: ralph9994 on July 17, 2009, 10:01:03 PM
because there are 10 instead of 9. im now at the final island and you need 10 for it.
Kewl, done.
Quote from: xSHiNOx on July 17, 2009, 10:23:52 PM
is it possible to make the enemies drop treasure map pieces?
I'll have a look later, right now my attentions on FUEL.  ;D
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 18, 2009, 10:09:54 AM
Here's one for italian version

Press 2 for 99 of Inventory slot 1-4 (Italian)
28616540 FEFF0100
42000000 90000000
007A2484 00000063
007A2494 00000063
007A24A4 00000063
007A24B4 00000063
E0000000 80008000

let me know if it works !!!   :)
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: ralph9994 on July 18, 2009, 07:02:34 PM
Quote from: TNTkryzt on July 18, 2009, 04:00:36 AM
Quote from: ralph9994 on July 17, 2009, 10:01:03 PM
because there are 10 instead of 9. im now at the final island and you need 10 for it.
Kewl, done.

lol:P ty btw. for editing the code now i can complete the game:P.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Kirby26 on July 28, 2009, 03:49:33 AM
the codes aren't working, why? i load the game with GUI USB launcher
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 28, 2009, 08:56:21 AM
To use the compiled cheats with the channel that use the Ocarina cheat system instead than the Gecko one you need to place the gct files in the "Codes" folder placed in the root of your SD card.
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Seelbreaker on July 28, 2009, 06:00:56 PM
About the Item Modifier, it won't work at the Sunny Go... i where just wondering why it didn't work after i tried it on the land it worked perfectly!
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on July 28, 2009, 06:56:27 PM
But at what language are oyu running the game?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Kirby26 on August 01, 2009, 03:49:48 AM
I put the GTC codes on the folder "codes" in the root of the SD card, the game i have it on spanish, since i talk spanish ^.^¡ they dosen't work in this language?
Title: Re: [Request] One Piece Unlimited Cruise Episode1 PAL [ROUPAF]
Post by: Apache81 on August 01, 2009, 12:08:00 PM
are you using the spain language cheat version?
Title: Re: [Request] One Piece Unlimited Cruise Episode 1 [ROUPAF]
Post by: TheRealSneakers on July 16, 2011, 05:30:12 PM
Anyone find any good fishing codes? What would be great would never letting a fish get away.