WiiRd forum

Wii & Development => Wii & Gamecube Hacking Tools => Topic started by: WiiOs-Ozelot on August 05, 2010, 07:02:31 PM



Title: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 07:02:31 PM
Hey Guys, i found this tool
(http://www.bilderhoster.net/safeforbilder/hkbm2zrf.png)

A GCNrd for Gamecube. Give a Version for supported USB gecko?
This tool can start with PSOload ect. but i have not a network hardware for Gamecube.

FOR ORIGINAL GAMECUBE CONSOLE NOT FOR WII WITH USB GECKO SUPPORT!!!

greetz Oze


Title: Re: GCNrd for USB Gecko?
Post by: biolizard89 on August 05, 2010, 08:48:46 PM
Hey Guys, i found this tool


A GCNrd for Gamecube. Give a Version for supported USB gecko?
This tool can start with PSOload ect. but i have not a network hardware for Gamecube.

FOR ORIGINAL GAMECUBE CONSOLE NOT FOR WII WITH USB GECKO SUPPORT!!!

greetz Oze
There is a GCNrd equivalent that uses the USB Gecko.  It's called WiiRd.  (WiiRd works fine on the GameCube.)


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 05, 2010, 08:54:03 PM
fail.....



Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 09:01:17 PM
Hey Guys, i found this tool


A GCNrd for Gamecube. Give a Version for supported USB gecko?
This tool can start with PSOload ect. but i have not a network hardware for Gamecube.

FOR ORIGINAL GAMECUBE CONSOLE NOT FOR WII WITH USB GECKO SUPPORT!!!

greetz Oze
There is a GCNrd equivalent that uses the USB Gecko.  It's called WiiRd.  (WiiRd works fine on the GameCube.)

WiiRD is not programmed for Gamecube! You can read?

WiiRD
GCNrd

so, what is the Word different? mh?
When you can read, the WiiRD is not programmed for GCN!
so, it is my NORMAL question to anyone and i will a wise answer!!! Also...
Gives a USB Gecko Version or NOT!

The WiiRD Assembler by Gamecube ist not Correctly!

AND I HAVE A GAMECUBE CONSOLE, NOT STUPID WII SHIT!!!!!!!!!!! <--- READ THIS FUCKING TEXT!


Title: Re: GCNrd for USB Gecko?
Post by: biolizard89 on August 05, 2010, 09:10:58 PM
Hey Guys, i found this tool


A GCNrd for Gamecube. Give a Version for supported USB gecko?
This tool can start with PSOload ect. but i have not a network hardware for Gamecube.

FOR ORIGINAL GAMECUBE CONSOLE NOT FOR WII WITH USB GECKO SUPPORT!!!

greetz Oze
There is a GCNrd equivalent that uses the USB Gecko.  It's called WiiRd.  (WiiRd works fine on the GameCube.)

WiiRD is not programmed for Gamecube! You can read?

WiiRD
GCNrd

so, what is the Word different? mh?
When you can read, the WiiRD is not programmed for GCN!
so, it is my NORMAL question to anyone and i will a wise answer!!! Also...
Gives a USB Gecko Version or NOT!

AND I HAVE A GAMECUBE CONSOLE, NOT STUPID WII SHIT!!!!!!!!!!! <--- READ THIS FUCKING TEXT!
No need to yell, cuss, or bash my reading skills.  As far as I know, WiiRd works fine on both GameCube and Wii.  In fact, WiiRd can't even tell which one you have; the GameCube version of GeckoOS looks the same regardless of which console it's running on, as far as WiiRd can tell.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 09:16:10 PM
ok, sorry


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 05, 2010, 09:18:44 PM
biolizard89....
he wont use wiird in gamecube mode because it sometimes fails!
his question:FOR ORIGINAL GAMECUBE CONSOLE NOT FOR WII WITH USB GECKO SUPPORT!!!

and nothing about wii mode.


Title: Re: GCNrd for USB Gecko?
Post by: biolizard89 on August 05, 2010, 09:31:40 PM
biolizard89....
he wont use wiird in gamecube mode because it sometimes fails!
his question:FOR ORIGINAL GAMECUBE CONSOLE NOT FOR WII WITH USB GECKO SUPPORT!!!

and nothing about wii mode.
I used the GameCube version of GeckoOS all the time before WiiPower's tool supported loading it from Wii mode.  I've never had it fail on me except when I was sufficiently stupid to attempt to access memory ranges that don't exist on GameCube.  I'm sure there are some games that don't work with it, but there are more games that don't work with GCNrd but do work with WiiRd.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 10:20:54 PM
I said again guys, I CREATE GCN CODES WITH THE ORIGINAL GAMECUBE CONSOLE, NOT GECKO OS MOD OR OTHER S**** GCN CRYPT TOOLS!!!!!!!!!!!

I create right GCN Codes with USB gecko and not AR codes to Ocarina Codes Encrypt tools -_______-
i know wiird works on Wii in Gamecube mode!!!! AND i know WiiRD works on Gamecube Console but, i said ORIGINAL G A M E C U B E  -  C O N S O L E!!

My easy question is, gives a USB gecko Version for GCNrd! I dont ask over Wii or Gecko os mod or other stuff's!

Please close this thread before I forget.... -.-


Title: Re: GCNrd for USB Gecko?
Post by: hawkeye2777 on August 05, 2010, 10:25:58 PM
WiiRd works with gamecube games... simple as that. Load up GC Gecko OS on a Gamecube and go.

Also, the compatibility will probably not be any different than using Gecko OS Mod (could possibly be worse)... keep that in mind.


Title: Re: GCNrd for USB Gecko?
Post by: biolizard89 on August 05, 2010, 10:33:37 PM
I said again guys, I CREATE GCN CODES WITH THE ORIGINAL GAMECUBE CONSOLE, NOT GECKO OS MOD OR OTHER S**** GCN CRYPT TOOLS!!!!!!!!!!!

I create right GCN Codes with USB gecko and not AR codes to Ocarina Codes Encrypt tools -_______-
i know wiird works on Wii in Gamecube mode!!!! AND i know WiiRD works on Gamecube Console but, i said ORIGINAL G A M E C U B E  -  C O N S O L E!!

My easy question is, gives a USB gecko Version for GCNrd! I dont ask over Wii or Gecko os mod or other stuff's!
Okay, so you say that you know WiiRd works on the GameCube console but you want GCNrd with USB Gecko on the GameCube console.  That's what WiiRd is.  Everything I said is applicable to the GameCube.  Not just a Wii emulating a GameCube.  The USB Gecko is a GameCube peripheral that also works on the Wii.  Same with the GameCube version of GeckoOS.  Load GeckoOS on your GameCube, plug in a USB Gecko, and connect with WiiRd, and you have all the functionality of GCNrd but with the USB Gecko.  Plus cheat codes are built in; GCNrd would require an Action Replay for that.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 10:36:18 PM
Quote
WiiRd works with gamecube games... simple as that. Load up GC Gecko OS and go.
i know that ;)

the difference is...

Gamecube Console:
-100% Game Compatibility
-No MIOS or patches must be installed


Wii with Gamecube mode and Gecko Os mod:
-Bad Game Compatibility
-You must Install MIOS and Other patches

So. i have installed MIOS ect. ALL Loaders said CODES FOUND...APPLYED BUT, the screen is BLACK or
the Codes is NOT applyed!!! I have created Gamecube Ocarina Codes (NO AR TO OCARINA!) and the Code works on my Gamcube Console WITH ORIGINAL DISCS!

AND I HAVE ORIGINAL GAMECUBE GAMES!!! NO BACKUPS!!!!!!
When all mine, it works, gecko os mod is better ect. BUT why it dosent work? mh?

What is Wrong?????


Title: Re: GCNrd for USB Gecko?
Post by: dcx2 on August 05, 2010, 10:37:35 PM
Ozelot, if you don't start acting more respectful, I will ban you.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 10:39:18 PM
respect for what? its a normal simple question -.-
Who will give me respectable? nobody!

Close this thread please....


Title: Re: GCNrd for USB Gecko?
Post by: dcx2 on August 05, 2010, 10:44:48 PM
This is not respectful.  This is rude.
  |
  |
  v
WiiRD is not programmed for Gamecube! You can read?

WiiRD
GCNrd

so, what is the Word different? mh?
When you can read, the WiiRD is not programmed for GCN!
so, it is my NORMAL question to anyone and i will a wise answer!!! Also...
Gives a USB Gecko Version or NOT!

The WiiRD Assembler by Gamecube ist not Correctly!

AND I HAVE A GAMECUBE CONSOLE, NOT STUPID WII SHIT!!!!!!!!!!! <--- READ THIS FUCKING TEXT!

By the way.  hawkeye and biolizard are trying to tell you that WiiRD is not a Wii-only thing.  WiiRD WILL WORK WITH AN ORIGINAL GAMECUBE CONSOLE. <--- READ THIS FUCKING TEXT!


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 10:48:26 PM
dcx2, and you mean, when you ban users from the forum is respectful? I do not think^^
You can Close this thread


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 05, 2010, 10:48:41 PM
oh no please no banns.
you also said to me "don't try again" by codetype C0.
do you think I'm glad to hear this with 3xWTF.

wiios is complettly right. please don't talk about any other Wii mods. if you don't know, just write nothig.

he KNOWS that WiiRd SUPPORT GCN MODE but he want to use the GCNrd gui. this is not too hard to understand or?


Title: Re: GCNrd for USB Gecko?
Post by: dcx2 on August 05, 2010, 10:53:04 PM
Ozelot, you are the one who started screaming and swearing at people who are trying to help you.  I did not come into this thread until you started acting like an asshole.

No need to yell, cuss, or bash my reading skills.

If you can't be civil, you aren't welcome in this community.


Title: Re: GCNrd for USB Gecko?
Post by: dcx2 on August 05, 2010, 10:54:23 PM
he KNOWS that WiiRd SUPPORT GCN MODE but he want to use the GCNrd gui. this is not too hard to understand or?

Let's try this one more time.

WE ARE NOT TALKING ABOUT GCN MODE ON A WII

WE ARE TALKING ABOUT AN ACTUAL GAMECUBE CONSOLE

YOU CAN USE WIIRD WITHOUT A WII


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 05, 2010, 10:56:31 PM
haha ähm dcx2 HE ************WONT************** USE WIIRD ON GCN!!
ozelot wont be angry or something like that!!
but everyone is talking about wiird. maybe some people can't read the problem?!


Title: Re: GCNrd for USB Gecko?
Post by: dcx2 on August 05, 2010, 10:59:25 PM
He won't use WiiRD because he thinks WiiRD doesn't work with a GameCube Console.  He wrongly believes that WiiRD requires a Wii console running a Wii game, or a Wii console running in GameCube mode.

WiiRD can connect to an actual GameCube console.  Not a Wii running in GCN mode, but an actual GCN.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 11:00:09 PM
no dcx2, i have respect for hackers with big know-how BUT i find not correctly User to ban from a simple question or harmless words. My first Topic is a normal simple question and all understood me when i said "for Gamecube COnsole" and all said Wii gecko Os mod ect. you know what i mean?

and this made me screaming and swearing because understood me. And a Moderator or Admin threaten me with banning! AND I'M NOT A ASSHOLE MY FRIEND ;) IS NOT RESPECTABLE!


Title: Re: GCNrd for USB Gecko?
Post by: dcx2 on August 05, 2010, 11:04:02 PM
No Ozelot, I am not threatening to ban you for a simple question or harmless words.  You were rude to people helping you.  That is why I threatened you with a ban.  It is not *what* you said, it is *how* you said it.

And everyone understood you.  You want to use a GameCube Console.

WiiRD works with GameCube consoles.  No Gecko OS Mod, no Wii, no Wii in GCN mode.

WiiRD works on GameCube consoles.  You don't need to use it on a Wii.

WiiRD works on GameCube consoles.  You don't need to use it on a Wii.

WiiRD works on GameCube consoles.  You don't need to use it on a Wii.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 11:08:28 PM
right but you must know, my english is bad!, You will respect from me but you say to me i'm Asshole?
i talk with James in a chat over this ;)


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 05, 2010, 11:11:00 PM
ozelot knows, that wiird works on gcn fine.
but he is just searching for the gcnrd with USB GECKO support and everyone gives him a wrong answer.

dcx2 for calling a user an asshole is very very bad and sad...


Title: Re: GCNrd for USB Gecko?
Post by: dcx2 on August 05, 2010, 11:13:51 PM
LOL!  Please, do talk to James about this.  Show him the thread.  I would love to hear his opinion.

deathwolf - you are wrong.  Ozelot wants to write hacks on an original GameCube console.  Ozelot thinks that WiiRD cannot do that.  Ozelot thinks that WiiRD requires a Wii and Gecko OS Mod.

i said "for Gamecube COnsole" and all said Wii gecko Os mod ect.

Nobody is talking about using a Wii or Gecko OS Mod.

EDIT:  Oh, please.  Ozelot was acting like an asshole.  Screaming and yelling at people trying to help him - that's an asshole.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 11:17:06 PM
dcx2. I SAID, WIIRD WORKS ON MY GAMECUBE! READ MY FIRST TOPICS!!!!!!


Quote
I create right GCN Codes with USB gecko and not AR codes to Ocarina Codes Encrypt tools -_______-
i know wiird works on Wii in Gamecube mode!!!! AND i know WiiRD works on Gamecube Console but, i said ORIGINAL G A M E C U B E  -  C O N S O L E!!

;)


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 05, 2010, 11:18:35 PM
dcx2 would you say, my german is fucking bad?

try to talk with ozelot in german mabye you can understand him better than me or something like this
if you think so ;)


Title: Re: GCNrd for USB Gecko?
Post by: dcx2 on August 05, 2010, 11:22:15 PM
dcx2. I SAID, WIIRD WORKS ON MY GAMECUBE! READ MY FIRST TOPICS!!!!!!

Hey Guys, i found this tool
(http://www.bilderhoster.net/safeforbilder/hkbm2zrf.png)

A GCNrd for Gamecube. Give a Version for supported USB gecko?
This tool can start with PSOload ect. but i have not a network hardware for Gamecube.

FOR ORIGINAL GAMECUBE CONSOLE NOT FOR WII WITH USB GECKO SUPPORT!!!

greetz Oze

I don't see anything there about WiiRD working on your GameCube console.  You said "NOT FOR WII".  WiiRD works without a Wii.

dcx2 would you say, my german is fucking bad?

try to talk with ozelot in german mabye you can understand him better than me or something like this
if you think so ;)

Neither of you understand the English that the people in this thread are speaking. 


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 11:22:55 PM
So, DCX2, wenn du sooooooo gut deutsch kannst, dann übersetze das hier mal mein süßer.
sprich mal bisschen deutsch hier und beweise uns mal wie gut du so bist ^^
Und wieso rede ich hier Englisch wenn der herr der meinung ist er kann besser deutsch? dann lass uns Deutsch hier reden.


Title: Re: GCNrd for USB Gecko?
Post by: dcx2 on August 05, 2010, 11:25:49 PM
Rules (http://wiird.l0nk.org/forum/index.php/topic,1671.msg17085.html#msg17085)

8. English language only! At least try to use proper grammar. Everyone forgives non-English speakers if they have problems but at least try. (Amendment: You may use other languages ONLY if you post an English Translation with it!)


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 05, 2010, 11:27:22 PM
bin ganz deiner meinung ozelot ;)
eine nette unterhaltung auf deutsch würde kein bisschen schaden^^


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 11:29:51 PM
how can find the Rules


Title: Re: GCNrd for USB Gecko?
Post by: dcx2 on August 05, 2010, 11:35:07 PM
Okay, fine.  I go out of my way to help you, Deathwolf.  When you ask questions, I try to answer them.  When you get it wrong, I keep working with you until you understand.  I spend a LOT of my time struggling to help you.

You want to behave like this?  Replying to the forum rules (with quoted "English language only") in German?  Fine.  I won't waste my time helping you any more.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 05, 2010, 11:41:31 PM
good, so... also GCNrd dosent work with USB gecko? good, you can Close this thread xD

and  i know WiiRD works on Gamecube ;D :D ;) :P

AND dcx2, ... I'M NOT A ASSHOLE! my Friend  ::)
dont say users as asshole und you will respect from asshole users  ;)
i have respect for Mods or Admins, But not mods or Admins the say to me I'm a asshole!

end


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 05, 2010, 11:46:57 PM
Okay, fine.  I go out of my way to help you, Deathwolf.  When you ask questions, I try to answer them.  When you get it wrong, I keep working with you until you understand.  I spend a LOT of my time struggling to help you.

You want to behave like this?  Replying to the forum rules (with quoted "English language only") in German?  Fine.  I won't waste my time helping you any more.

finally? do you really think I'm laughing about "wtf, what do you think about that" "don't try it again".
and sometimes I think you didn't read my full answers. I said that, I'm very gratefull to you for all your help, but I think you didn't want to read this or ignore it. suddenly you called ozelot an asshole.
is this okay? what do you think about that. and btw.... maybe english is the world language but it's NOT easy for and 15 years old boy to understand all this hard things! I tried every time my best to learn new from you because you was a really great teacher for me!!! ozelot and me are working in some tut's for german people! how to make ASM codes etc... then you said to me "I understand ozelot wrong". what about that? hello please tell me what's wrong?! yep that is it.

thank you very much dcx2 for all your time and help


btw I'm sure you didn't read this again. that makes me sad.


Title: Re: GCNrd for USB Gecko?
Post by: Thomas83Lin on August 05, 2010, 11:57:38 PM
You know what the problem is in this thread, little thing called a Language barrier, cause the op did come off extremely rude. he may not of meant to but he did. 


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 06, 2010, 12:00:38 AM
You know what the problem is in this thread, little thing called a Language barrier, cause the op did come off extremely rude. he may not of meant to but he did. 

what do you think about when you get called an asshole?
is it greate?


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 06, 2010, 12:05:10 AM
but not intentional thomas. i know my english is bad BUT I try as best as possible speaking English.
and for a moderator is not correctly say to a User is a Asshole and a moderator will respect for this.
I think this shit from dcx2 said to me as asshole. The Moderator threatens with banns when a User speak not correctly English here and anyone not properly understood.

this is the problem. I Asked a simple question here and i know long time ago WiiRD works on Gamecube Console.
I have created GCN Codes with wiird and i have released on the Database.
I asked over GCNrd with USB GECKO Support.
so, i will a simple answer YES or NO what is the problem????


Title: Re: GCNrd for USB Gecko?
Post by: hawkeye2777 on August 06, 2010, 12:11:18 AM
Ok, why do you want GCNrd? What advantages does it have over WiiRd?

EDIT: It probably won't happen, since both GCNrd and GCNrdGUI are closed source as far as I know... but the changes you want could maybe be implemented in Gecko.NET or WiiRd (console) - that's why I asked for advantages.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 06, 2010, 12:19:15 AM
Also,

i found this tool by gscentral
i think, this is a special tool FOR gamecube Console and i saw you can starting this tool with PSOload and a Network Hardware for Gamecube.

i think i ask here an alternate GCNrd tool his supported USB Gecko and not Network hardware or PSOload method.
this is my question. Gives an alternate GCNrd tool he can communicate with USB gecko or not also YES or NOT. this is my question more not.


Title: Re: GCNrd for USB Gecko?
Post by: hawkeye2777 on August 06, 2010, 12:21:36 AM
Ok, why do you want GCNrd? What advantages does it have over WiiRd?

Could you answer that please?

EDIT: Is this the reason?:

Quote from: -Ozelot-
The WiiRD Assembler by Gamecube ist not Correctly!

If so, that's not a WiiRd problem. I think I know of a way you can fix this; just let me know if that's what you are asking.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 06, 2010, 12:24:01 AM
I would like to try it with my Gamecube Console.

The tool GCNrd can create Action Replay Codes for Gamecube. The Tool Cummonicate with the Network Hardware for Gamecube Console and Debugging over Netwwork and i search a alternate from this tool the Communicate over USB gecko and not over Network.


Title: Re: GCNrd for USB Gecko?
Post by: hawkeye2777 on August 06, 2010, 12:41:56 AM
As far as I know... GCNrd is closed source; meaning you can't make it work with the USB Gecko.

So, if you want to use GCNrd... you'll need to buy a BBA for your Gamecube.

Still, why use GCNrd?


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 06, 2010, 12:50:56 AM
Quote
As far as I know... GCNrd is closed source; meaning you can't make it work with the USB Gecko.
ok ^^

Quote
So, if you want to use GCNrd... you'll need to buy a BBA for your Gamecube.
ok, i buy a BBA then.

thx, this is the answer what i will, not more thx.


Quote
Still, why use GCNrd?
This Debugging tool can create AR Codes only for Gamecube.

WiiRD = for Wii/or in Gamecube mode and for Gamecube Console --> Ocarina Codes
GCNrd = Only for Gamecube --> Creating AR Codes
also i will create AR Codes ^^

This AR Codes have this format:

XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX

with another Codetypes


Title: Re: GCNrd for USB Gecko?
Post by: hawkeye2777 on August 06, 2010, 12:58:47 AM
You can still use WiiRd to create Action Replay codes; you just can't test them in WiiRd. Just take the addresses and then apply the Gamecube code types to them. Then, to test the finished Action Replay codes, just type them into an AR.

BBA's are quite rare+expensive from my searches now (about $50 USD on Amazon), so that might be a better option for you.


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 06, 2010, 01:14:32 AM
ah ok, thx. my question is answered :) without threats banning and no insults lol thx


my last Word to dcx2:

you can see dcx2, Nothing insults and nothing threats banning and I have speaking normal ;)
I'm waiting for an apology from you because you have described me as an asshole  ;)
I have no respectful of people describe me as a asshole. Not for Mods or Admins!
respect my language! I respect your language to communicate here!
I can speak normal here and it is not my intention! others have misunderstood me and I the other!
and when you mine you can better talk german, then talk later with me in german ;)

Also, Respectly the normal Users here and we have respect for mods or admins and we all Lucky ;)

so, thx hawkeye2777 for the information.

PS: Why gives here not a german section eh? its a good idea for users cant not so good speaking English :rolleyes:
German and English support here, is a good idea ;)


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 06, 2010, 09:40:08 AM
my last Word to dcx2:

I'm waiting for an apology from you because you have described me as an asshole  ;)

You need to get over yourself. If you don't respect the other members, the mods are not going to respect you.

xD did you read the full topic?
everyone gives him everytime the wrong answer and can't read his problem.
but dcx2 should not call him an asshole only by this.
you see, suddenly dcx2 wont help me anymore by explaing what ozelot want to do.
it's a joke? should I laught?


Title: Re: GCNrd for USB Gecko?
Post by: hawkeye2777 on August 06, 2010, 01:06:26 PM
my last Word to dcx2:

I'm waiting for an apology from you because you have described me as an asshole  ;)

You need to get over yourself. If you don't respect the other members, the mods are not going to respect you.

xD did you read the full topic?
everyone gives him everytime the wrong answer and can't read his problem.
but dcx2 should not call him an asshole only by this.
you see, suddenly dcx2 wont help me anymore by explaing what ozelot want to do.
it's a joke? should I laught?

He didn't explain himself properly until the last few posts or so... the first post confused me too, but then I saw one line in one of his later posts that made me realize what he was trying to ask. I thought he was asking if there was a way to hack GCN games in a way similar to GCNrd... so I said that WiiRd worked fine.

There's a better way to ask a question than simply yelling at someone saying "I know that already"... if something to the effect of "that is not what I am trying to ask about" was stated, we might have avoided some of the bad blood here.

Let's just forget this and move on... you can find faults on "both sides".


Title: Re: GCNrd for USB Gecko?
Post by: WiiOs-Ozelot on August 06, 2010, 05:39:31 PM
my last Word to dcx2:

I'm waiting for an apology from you because you have described me as an asshole  ;)

You need to get over yourself. If you don't respect the other members, the mods are not going to respect you.

that's your pitch ;) and i have no respect for you :P


Title: Re: GCNrd for USB Gecko?
Post by: Deathwolf on August 06, 2010, 05:55:15 PM
epic fail xD


Title: Re: GCNrd for USB Gecko?
Post by: hetoan2 on August 07, 2010, 12:38:11 PM
I dont even know if i should be saving Ozelot from himself, but whatever -.-

I'm locking this thread. It's gone nowhere.


To sum up all the informative posts:

WiiRD works with a USB Gecko
GCNrd works with a BBA only
GCNrd is closed sourced and will not ever work with a gecko
WiiRD will work with both a GCN and a Wii

And heres some of my own insight.

GCNrd GUI and WiiRD GUI are both made by kenobi. I assume they were made off the same code so they should both work relatively the same.

Just use WiiRD if you have a gecko. The codes will work anyways -.-